[MLB-WIRELESS] wl500,r100

[John]

You been stuffing around again with your toys Rich!
you should sign off your emails with:

RvO
(BetaTester, Kahless351,nodeGDW)

but thanks for finding this out Rich, its good to know!

 If anyone can, Rich can! :)

John
(FOA, FOB, FOC and RVO's mate)..lol

----- Original Message ----- 
From: "RvO" <rvo at optusnet.com.au>
To: "Melbourne Wireless" <melbwireless at melbournewireless.org.au>
Sent: Saturday, April 22, 2006 9:12 PM
Subject: [MLB-WIRELESS] wl500,r100


> Just some info on these units, if you write some data to the nvram which 
> causes it not to boot, or you can't remember the IP address, you can 
> recover by completely erasing the nvram by installing 
> wl500g-clear-nvran.trx (http://wl500g.dyndns.org/wl500g-clear-nvram.trx) 
> firmware. After powering down the unit, you just simply follow normal 
> procedure and install your desired firmware.
> 
> Regards,
> 
> RvO
> (Kahless351,nodeGDW)
> _______________________________________________
> Melbwireless mailing list
> Melbwireless at wireless.org.au
> http://wireless.org.au/mailman/listinfo/melbwireless
>