[MLB-WIRELESS] wl500,r100

[RvO]

Just some info on these units, if you write some data to the nvram which 
causes it not to boot, or you can't remember the IP address, you can 
recover by completely erasing the nvram by installing 
wl500g-clear-nvran.trx (http://wl500g.dyndns.org/wl500g-clear-nvram.trx) 
firmware. After powering down the unit, you just simply follow normal 
procedure and install your desired firmware.

Regards,

RvO
(Kahless351,nodeGDW)