No subject
Tue Jan 17 15:36:28 EST 2012
>type 10.10.160.18, I get my SME server's home page.
>
>Would I be right in thinking this setup is working reasonably ? Or is there
>something I'm completely missing ?
>
Ok, your close now. So the problem is that you have a config that allows
your private segment to do what it wants (good!) but you can't allow
anything on t! he second public 10.10.0.0 segment to get into your private
segment, except through the port forwarding you have set up (bad).
If you think about the firewall the WRT is setting up, it will be open from
the private side ( let's everything through) and only allows the ports you
have forwarded through from the public side. Any URL you are entering is not
going through because of two things:
1. routing - There is nothing telling your laptop or other machines on the
10.10.0.0 net that the WRT is the gateway for the 192.x addresses.
2. firewall - even if you set up routes or set the default route to use the
WRT as a gateway for 192.x the firewall on the default firmware will block
any initiated request from that side of the device (i.e. the public side)
As a further experiment try turning of the firewall on the WRT and setting
it as the default route on your laptop. You should then be able to get
through toyour private segmen! t ( and possibly beyond).
To get to a workable solution you are going to need to go beyond the default
firmware. You will need to either run a different firewall on it or
add/change the IPtable rules.
The default firmware doesn't use any firewall package but sets up the IP
tables rules in c code by building a restore file out of the discrete chains
it sets up and the restoring the file it just built.
If you put openWRT on your WRT you should be able to configure it the way
you want.
To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message
---------------------------------
Find local movie times and trailers on Yahoo! Movies.
Brenton (iViLe)
Access node fut from the web, live stats. http://211.28.235.187:6111
ivile01 at yahoo.com.au ivile at bur.st
www.ivile.tk
www.waveguides.tk
MW NODE: FUT, FUU
---------------------------------
Find local movie times and trailers on Yahoo! Movies.
--0-2101128297-1113022050=:17862
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
<DIV>You can use NAT so that your computer can access other node but they can access your computers on the inside. I used this before before i setup routing on my node.<BR><BR><B><I>Zoi Jones <zoiqq at yahoo.com.au></I></B> wrote:
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<DIV>Thanks for the reply Ash But,</DIV>
<DIV> </DIV>
<DIV>I dont want someone (anyone) on the WLAN side of my system, to be able to view see or sue any of my private LAN except the ports as I have forwarded them.</DIV>
<DIV> </DIV>
<DIV>In a sense, I want to firewall anyone from seeing or using my private LAN and my aDSL service.</DIV>
<DIV> </DIV>
<DIV>From what your saying, I think what I've done is about right for my needs.</DIV>
<DIV> </DIV>
<DIV>Anyone else have any thoughts ?</DIV>
<DIV> </DIV>
<DIV>Phil NodeHPL.</DIV>
<DIV><BR><B><I>David Ashburner <d_ashburner at hotmail.com></I></B> wrote:</DIV>
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid"><BR><BR>>My Linksys WRT54GS (default Firmware) is 192.168.0.2 (LAN) and 10.10.160.18 <BR>>(WAN) with port forwarding 25,80,110 and 443 to 192.168.0.10 (my SME <BR>>server)<BR>><BR>>I plugged the Linksys Routers WAN port to my cheap Switch which links all <BR>>the wireless side of my network, including a Senao AP currently set to <BR>>10.10.160.19 and my Laptop (for testing atm) set to 10.10.160.20<BR>><BR><BR>>From the Laptop, If I type any URL (outside 10.x.x.x), I get nothing, If I <BR>>type 10.10.160.18, I get my SME server's home page.<BR>><BR>>Would I be right in thinking this setup is working reasonably ? Or is there <BR>>something I'm completely missing ?<BR>><BR><BR>Ok, your close now. So the problem is that you have a config that allows <BR>your private segment to do what it wants (good!) but you can't allow <BR>anything on t!
! he
second public 10.10.0.0 segment to get into your private <BR>segment, except through the port forwarding you have set up (bad).<BR><BR>If you think about the firewall the WRT is setting up, it will be open from <BR>the private side ( let's everything through) and only allows the ports you <BR>have forwarded through from the public side. Any URL you are entering is not <BR>going through because of two things:<BR><BR>1. routing - There is nothing telling your laptop or other machines on the <BR>10.10.0.0 net that the WRT is the gateway for the 192.x addresses.<BR><BR>2. firewall - even if you set up routes or set the default route to use the <BR>WRT as a gateway for 192.x the firewall on the default firmware will block <BR>any initiated request from that side of the device (i.e. the public side)<BR><BR>As a further experiment try turning of the firewall on the WRT and setting <BR>it as the default route on your laptop. You should then be able to get <BR>through toyour private!
segmen!
t ( and possibly beyond).<BR><BR>To get to a workable solution you are going to need to go beyond the default <BR>firmware. You will need to either run a different firewall on it or <BR>add/change the IPtable rules.<BR><BR>The default firmware doesn't use any firewall package but sets up the IP <BR>tables rules in c code by building a restore file out of the discrete chains <BR>it sets up and the restoring the file it just built.<BR><BR>If you put openWRT on your WRT you should be able to configure it the way <BR>you want.<BR><BR><BR><BR>To unsubscribe: send mail to majordomo at wireless.org.au<BR>with "unsubscribe melbwireless" in the body of the message<BR><BR></BLOCKQUOTE>
<P><BR>
<HR SIZE=1>
Find local movie times and trailers on <A href="http://au.rd.yahoo.com/mail/tagline/*http://au.movies.yahoo.com" target=_blank><B>Yahoo! Movies.</B></A><BR></BLOCKQUOTE></DIV><BR><BR>Brenton (iViLe)<br>Access node fut from the web, live stats. http://211.28.235.187:6111<br>ivile01 at yahoo.com.au ivile at bur.st<br>www.ivile.tk<br>www.waveguides.tk<br>MW NODE: FUT, FUU<p><br><hr size=1>
Find local movie times and trailers on <a href="http://au.rd.yahoo.com/mail/tagline/*http://au.movies.yahoo.com" target=_blank><b>Yahoo! Movies.</b></a><br>
--0-2101128297-1113022050=:17862--
To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message
More information about the Melbwireless
mailing list