[MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?

[evilbunny]

Hello Mike,

I thought they only allowed for radio input... ie max system of radio
+ amp = 30, antenna would still go close to putting you over...

you have to pay extra for those types of amps in any case...

-- 
Best regards,
 evilbunny                            mailto:evilbunny at sydneywireless.com

http://www.SydneyWireless.com - Exercise your communications
freedom to make it do what you never thought possible... 

Wednesday, June 26, 2002, 10:11:43 PM, you wrote:


MC> Most amps have automatic gain control...
MC> making it 27 + 8 = just under 4 watt legal limit


>>
>>Hello Andrew,
>>
>>500mW = 27dBm
>>
>>27+15+8 = 50dBm or... 100W :)
>>or if you have a cisco it's 130W ;)
>>
>>I some how doubt you could make that legal without wasting a lot of RX
>>and making the whole thing pointless :)
>>
>>--
>>Best regards,
>>  evilbunny                            mailto:evilbunny at sydneywireless.com
>>
>>http://www.SydneyWireless.com - Exercise your communications
>>freedom to make it do what you never thought possible...
>>
>>Wednesday, June 26, 2002, 9:52:44 PM, you wrote:
>>
>>AD> 3 degree beam width.. i think that 8dBi omni i ordered of TIB from 
>>superpass
>>AD> is 18deg beam width?
>>
>>AD> you can see where i was coming from saying an amp (2 way?) + this would 
>>be
>>AD> better ?
>>
>>AD> i thought you could get 500mw amps for 200-300 dollars, not sure 
>>tho....
>>
>>
>>
>>AD> ----- Original Message -----
>>AD> From: "evilbunny" <evilbunny at sydneywireless.com>
>>AD> To: "Andrew Dean" <ferni at shafted.com.au>
>>AD> Cc: "melbwireless" <melbwireless at wireless.org.au>
>>AD> Sent: Wednesday, June 26, 2002 9:44 PM
>>AD> Subject: Re[4]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested 
>>?
>>
>>
>> >> Hello Andrew,
>> >>
>> >> Quick search on google 15.4 dBi omni's has a 3 degree beam width...
>> >> 175cm long and about 1kg in weight, rated at 216Km/hr
>> >>
>> >> http://www.firstmilewireless.com/prod_ant2ov15.html
>> >>
>> >> For the vertical plane plot etc...
>> >>
>> >> --
>> >> Best regards,
>> >>  evilbunny                            
>>mailto:evilbunny at sydneywireless.com
>> >>
>> >> http://www.SydneyWireless.com - Exercise your communications
>> >> freedom to make it do what you never thought possible...
>> >>
>> >> Wednesday, June 26, 2002, 9:29:54 PM, you wrote:
>> >>
>> >> AD> sorry eveilbunny, i dunno the details
>> >>
>> >> AD> all i know is the antennas dont actually create more power, they 
>>just
>>AD> focus
>> >> AD> the power of the card in a certain direction...
>> >>
>> >> AD> ....
>> >> AD> ----- Original Message -----
>> >> AD> From: "evilbunny" <evilbunny at sydneywireless.com>
>> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
>> >> AD> Sent: Wednesday, June 26, 2002 9:10 PM
>> >> AD> Subject: Re[2]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone 
>>interested
>>AD> ?
>> >>
>> >>
>> >> >> Hello Andrew,
>> >> >>
>> >> >> Which is what my previous question was, how small is the beam width?
>> >> >>
>> >> >> --
>> >> >> Best regards,
>> >> >>  evilbunny
>>AD> mailto:evilbunny at sydneywireless.com
>> >> >>
>> >> >> http://www.SydneyWireless.com - Exercise your communications
>> >> >> freedom to make it do what you never thought possible...
>> >> >>
>> >> >> Wednesday, June 26, 2002, 8:39:39 PM, you wrote:
>> >> >>
>> >> >> AD> I'm not 100% on it but as far as I know the higher the gain of 
>>an
>>AD> omni
>> >> AD> the
>> >> >> AD> flatter the signal, like a pancake flat :)
>> >> >>
>> >> >> AD> which is good if you are on the same level as the omni.. but if
>>AD> your
>> >> AD> below
>> >> >> AD> it or above it... etc.. you won't get a signal.... with a lower
>>AD> gain
>> >> AD> omni
>> >> >> AD> then the signal kinda doesn't go as far... but is more spread 
>>out
>> >> >> AD> vertically....
>> >> >>
>> >> >> AD> someone feel free to correct me if I have it wrong?
>> >> >>
>> >> >> AD> Ferni
>> >> >> AD> ----- Original Message -----
>> >> >> AD> From: "vak" <vak at alphalink.com.au>
>> >> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
>> >> >> AD> Sent: Wednesday, June 26, 2002 8:33 PM
>> >> >> AD> Subject: Re: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone 
>>interested
>>AD> ?
>> >> >>
>> >> >>
>> >> >> >> Do you mean that the signal density is three dimensionally flat ?
>> >> >> >>
>> >> >> >> Vaskos
>> >> >> >> ---------
>> >> >> >>
>> >> >> >> Drew wrote:
>> >> >> >>
>> >> >> >> > vak wrote:
>> >> >> >> >
>> >> >> >> > >Nup, not flat range at all.
>> >> >> >> > >
>> >> >> >> > 15.4dbi is about as flat as an omni gets.
>> >> >> >> >
>> >> >> >> > D
>> >> >> >> >
>> >> >> >> > To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> >> > with "unsubscribe melbwireless" in the body of the message
>> >> >> >>
>> >> >> >>
>> >> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> >> with "unsubscribe melbwireless" in the body of the message
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >> AD> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> AD> with "unsubscribe melbwireless" in the body of the message
>> >> >>
>> >> >>
>> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> with "unsubscribe melbwireless" in the body of the message
>> >> >>
>> >> >>
>> >>
>> >>
>> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> with "unsubscribe melbwireless" in the body of the message
>> >>
>> >>
>>
>>
>>To unsubscribe: send mail to majordomo at wireless.org.au
>>with "unsubscribe melbwireless" in the body of the message




MC> _________________________________________________________________
MC> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.


MC> To unsubscribe: send mail to majordomo at wireless.org.au
MC> with "unsubscribe melbwireless" in the body of the message


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message