[MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?

[Mike C]

Most amps have automatic gain control...
making it 27 + 8 = just under 4 watt legal limit


>
>Hello Andrew,
>
>500mW = 27dBm
>
>27+15+8 = 50dBm or... 100W :)
>or if you have a cisco it's 130W ;)
>
>I some how doubt you could make that legal without wasting a lot of RX
>and making the whole thing pointless :)
>
>--
>Best regards,
>  evilbunny                            mailto:evilbunny at sydneywireless.com
>
>http://www.SydneyWireless.com - Exercise your communications
>freedom to make it do what you never thought possible...
>
>Wednesday, June 26, 2002, 9:52:44 PM, you wrote:
>
>AD> 3 degree beam width.. i think that 8dBi omni i ordered of TIB from 
>superpass
>AD> is 18deg beam width?
>
>AD> you can see where i was coming from saying an amp (2 way?) + this would 
>be
>AD> better ?
>
>AD> i thought you could get 500mw amps for 200-300 dollars, not sure 
>tho....
>
>
>
>AD> ----- Original Message -----
>AD> From: "evilbunny" <evilbunny at sydneywireless.com>
>AD> To: "Andrew Dean" <ferni at shafted.com.au>
>AD> Cc: "melbwireless" <melbwireless at wireless.org.au>
>AD> Sent: Wednesday, June 26, 2002 9:44 PM
>AD> Subject: Re[4]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested 
>?
>
>
> >> Hello Andrew,
> >>
> >> Quick search on google 15.4 dBi omni's has a 3 degree beam width...
> >> 175cm long and about 1kg in weight, rated at 216Km/hr
> >>
> >> http://www.firstmilewireless.com/prod_ant2ov15.html
> >>
> >> For the vertical plane plot etc...
> >>
> >> --
> >> Best regards,
> >>  evilbunny                            
>mailto:evilbunny at sydneywireless.com
> >>
> >> http://www.SydneyWireless.com - Exercise your communications
> >> freedom to make it do what you never thought possible...
> >>
> >> Wednesday, June 26, 2002, 9:29:54 PM, you wrote:
> >>
> >> AD> sorry eveilbunny, i dunno the details
> >>
> >> AD> all i know is the antennas dont actually create more power, they 
>just
>AD> focus
> >> AD> the power of the card in a certain direction...
> >>
> >> AD> ....
> >> AD> ----- Original Message -----
> >> AD> From: "evilbunny" <evilbunny at sydneywireless.com>
> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
> >> AD> Sent: Wednesday, June 26, 2002 9:10 PM
> >> AD> Subject: Re[2]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone 
>interested
>AD> ?
> >>
> >>
> >> >> Hello Andrew,
> >> >>
> >> >> Which is what my previous question was, how small is the beam width?
> >> >>
> >> >> --
> >> >> Best regards,
> >> >>  evilbunny
>AD> mailto:evilbunny at sydneywireless.com
> >> >>
> >> >> http://www.SydneyWireless.com - Exercise your communications
> >> >> freedom to make it do what you never thought possible...
> >> >>
> >> >> Wednesday, June 26, 2002, 8:39:39 PM, you wrote:
> >> >>
> >> >> AD> I'm not 100% on it but as far as I know the higher the gain of 
>an
>AD> omni
> >> AD> the
> >> >> AD> flatter the signal, like a pancake flat :)
> >> >>
> >> >> AD> which is good if you are on the same level as the omni.. but if
>AD> your
> >> AD> below
> >> >> AD> it or above it... etc.. you won't get a signal.... with a lower
>AD> gain
> >> AD> omni
> >> >> AD> then the signal kinda doesn't go as far... but is more spread 
>out
> >> >> AD> vertically....
> >> >>
> >> >> AD> someone feel free to correct me if I have it wrong?
> >> >>
> >> >> AD> Ferni
> >> >> AD> ----- Original Message -----
> >> >> AD> From: "vak" <vak at alphalink.com.au>
> >> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
> >> >> AD> Sent: Wednesday, June 26, 2002 8:33 PM
> >> >> AD> Subject: Re: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone 
>interested
>AD> ?
> >> >>
> >> >>
> >> >> >> Do you mean that the signal density is three dimensionally flat ?
> >> >> >>
> >> >> >> Vaskos
> >> >> >> ---------
> >> >> >>
> >> >> >> Drew wrote:
> >> >> >>
> >> >> >> > vak wrote:
> >> >> >> >
> >> >> >> > >Nup, not flat range at all.
> >> >> >> > >
> >> >> >> > 15.4dbi is about as flat as an omni gets.
> >> >> >> >
> >> >> >> > D
> >> >> >> >
> >> >> >> > To unsubscribe: send mail to majordomo at wireless.org.au
> >> >> >> > with "unsubscribe melbwireless" in the body of the message
> >> >> >>
> >> >> >>
> >> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
> >> >> >> with "unsubscribe melbwireless" in the body of the message
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >> AD> To unsubscribe: send mail to majordomo at wireless.org.au
> >> >> AD> with "unsubscribe melbwireless" in the body of the message
> >> >>
> >> >>
> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
> >> >> with "unsubscribe melbwireless" in the body of the message
> >> >>
> >> >>
> >>
> >>
> >> To unsubscribe: send mail to majordomo at wireless.org.au
> >> with "unsubscribe melbwireless" in the body of the message
> >>
> >>
>
>
>To unsubscribe: send mail to majordomo at wireless.org.au
>with "unsubscribe melbwireless" in the body of the message




_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message