[MLB-WIRELESS] DLink 900AP+ in client mode to non-DLink AP!

[Michael_Florence at dlink.com.au]

Hi,

1) I have no information on v2.4 at this stage except the basic stuff which I
shared re: speed. Will let you know as soon as I get more. With the firmware
updates only the "major" features seem to be listed.

2) Unfortunately our guys do not have time to test our AP's in client mode, and
we have no other brands of AP's to test them with. Therefore the users input is
appreciated.  (Thanks Craig).

3) I have some questions for you guys.

a) Firstly Craig - what version of firmware were you using in order for the
DWL-900AP+ to work as a client with your Cisco BR-340?

b) Others, what version of firmware were others using when they had no success
using the DWL-900AP+ as a client? If it was a previous version to Craig's then I
would appreciate it if you re-test & try again. No guarantee's here, just taking
an educated guess.

Michael Florence
michael at dlink.com.au









"Craig Mead" <craig.mead at pagesmith.com.au> on 11/12/2002 02:15:11 PM
                                                                                
                                                                                
                                                                                


                                                              
                                                              
                                                              
 To:      melbwireless at wireless.org.au,                       
          syd-wireless at lists.sydneywireless.com, "mesh"       
          <mesh at itee.uq.edu.au>, wireless at innaloo.net         
                                                              
 cc:      (bcc: Michael Florence/Sales/DLINK-AUST)            
                                                              
                                                              
                                                              
 Subject: [MLB-WIRELESS] DLink 900AP+ in client mode to       
          non-DLink AP!                                       
                                                              







OK,

So, everyones been saying that it will only work to other DLink AP's if in
client mode.

Fired one up and tested it to my Cisco BR-340 (which is running in AP mode)
and everythings running fine.

Has anyone else had luck with other non-DLink AP's?

Michael, is there any word on why this is not working from HQ or news wether
it will be worked around in the 2.4(?) firmware due sometime this month?

Cheers, Craig


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message





To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message