[MLB-WIRELESS] Need some advice can anyone help?

Mike mike at datafast.net.au
Wed Oct 16 12:04:42 EST 2002


If you have a wavepoint II, then you can simply upgrade the firmware and put in whatever cards you like, I use enterasys cards in mine.

..Unless you're talking about the wavepoint 1?
  ----- Original Message ----- 
  From: Mikel Pretty 
  To: Melbwireless 
  Sent: Wednesday, October 16, 2002 11:16 AM
  Subject: [MLB-WIRELESS] Need some advice can anyone help?


  I am looking at replacing our wavepoint dual 2mbps AP with maybe 2 Linksys Wap11 Ver 2.2.
  Wondering if the Wap11 bridges to the LAN (I think it does just wondering if you have had trouble with them) as well as wanting to know if it has 100mw output without being hacked.

  See 4 Wap11's is cheaper than 1 Avaya AP-3 with 2 gold cards and 2 Avaya AP-1 and 1 gold card at the other ends of the 2 links.

  I know we could use a Linux box ( As I use for my community wireless link) and use cards in those.  However a standalone solution is what we are after at the 3 diff points.

  Am interested if you have any other ideas.

  Cisco would be good but big $$$$$$$$$$

  So am after other alternatives

  Thanks

  Mikel

*******************************************************************************
This footnote confirms this email has been checked for the presence of viruses
however our liability is limited to the resupply of attachments only.

Any representations or opinions expressed are those of the individual sender,
and not necessarily those of Sunraysia Institute of TAFE.
*******************************************************************************



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20021016/b19ca55c/attachment.html>


More information about the Melbwireless mailing list