[MLB-WIRELESS] weather station help :-(

[Peter Buncle]

Hi Ross,

Do you have an RJ12 crimper ?

I've read posts about the cables not being crimped properly.

But I would have though the temp sensor would have been in the main outside controller.
(box In with 2 or 3 rj12 connectors).

Otherwise see if you can get a replacement.


Kind Regards


Peter Buncle

From: melbwireless-bounces at lists.wireless.org.au [mailto:melbwireless-bounces at lists.wireless.org.au] On Behalf Of Ross Byrne
Sent: Sunday, 18 August 2013 3:02 PM
To: Melbourne Wireless
Subject: [MLB-WIRELESS] weather station help :-(

Hi
I have a WH3081 weather station but can't get the Outdoor Temperature on the base station :-(

[cid:image002.png at 01CE9C24.6D1CC200]I get everything else - wind speed + direction, rain, UV index, light, etc. I have undertaken all he steps in the manual to troubleshoot the problem - pressed the         for four seconds to enter manual RF Mode. I have pressed the reset button under the solar panel; taken all batteries out and  inserting them according to instructions in the manual.....but all to no avail :-(((

I have scanned various forums but no one has had this problem. Main problems seem to be with the solar readings.

Does anyone have any ideas?

Thanks

Ross Byrne


Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.
http://www.mailguard.com.au/mg


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.wireless.org.au/pipermail/melbwireless/attachments/20130818/f193fa05/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 391 bytes
Desc: image002.png
URL: <https://lists.wireless.org.au/pipermail/melbwireless/attachments/20130818/f193fa05/attachment.png>