[MLB-WIRELESS] getting an IP address for my node

[Andrew Van Slageren]

Hi Ross,

I believe there are a number of people responsible for GHO (who should all be on this list), however they'll need to know the access point you're connecting to first (name/SSID).

Cheers,
Andrew.


From: Roscoe [mailto:ross at iready.com.au]
Sent: Tuesday, 8 May 2012 9:49 PM
To: Andrew Van Slageren
Subject: RE: [MLB-WIRELESS] getting an IP address for my node

Hi Andrew

The node I can see from mine is GHO  I believe  - on the top of Mt. Dandenong

Do you know who is the owner of GHO that I can email to request an address from the access point

Thanks Heaps
Ross





At 09:37 PM 8/05/2012, you wrote:

Hi Ross,

Which node are you planning to connect to?

The IP address that you configure on your wireless client will need to be allocated from the subnet of the access point you?re connecting to, either from the wiki page for that node, or by emailing the owner of the node to request one.

Cheers,
Andrew.

From: melbwireless-bounces at lists.wireless.org.au<mailto:melbwireless-bounces at lists.wireless.org.au> [ mailto:melbwireless-bounces at lists.wireless.org.au] On Behalf Of MW at iready.com.au<mailto:MW at iready.com.au>
Sent: Tuesday, 8 May 2012 9:14 PM
To: melbwireless at lists.wireless.org.au<mailto:melbwireless at lists.wireless.org.au>
Subject: [MLB-WIRELESS] getting an IP address for my node

Hi

I am still trying to get an IP address assigned to my node KQB
I see that 10.10.129.7 is available
I get to http://melbourne.wireless.org.au/wiki/?Available

But can't see anywhere I can go to reserve the IP

Any help would be greatly appreciated
Still looking forward to getting the node active

Regards
Ross Byrne
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20120508/4066c762/attachment.html>