[MLB-WIRELESS] Moving R100s to Kamikaze

[Peter Buncle]

I think this just means the broadcom wireless card isn't supported ,
thus you just need
To replace it with an atheros one and use madwifi.

Personally I'd just stick with RC5 as it just works.

The 2.6 kamakazi madwifi driver isn't the best, I've tried it and am
going back
To what works.

Cheers

Peter


-----Original Message-----
From: melbwireless-bounces at wireless.org.au
[mailto:melbwireless-bounces at wireless.org.au] On Behalf Of Bryan
Pliatsios
Sent: Friday, 18 July 2008 9:14 AM
To: melbwireless at wireless.org.au
Subject: [MLB-WIRELESS] Moving R100s to Kamikaze

Hi guys,
  thought it was about time to move to kamikaze.

The R100s (WL500g) seem to have been left behind:

"Note: beginning with SVN revision 10137 (and up to current rev10996), a
new version 4.150.10.5 of the broadcom-wl driver and utils was
integrated, which unfortunately does not seem to support the WLAN module
in the WL-500g any longer. Unfortunately, the changes lie within binary
code, so probably the only way is to get the old 4.80.53.0 version
ported forward."
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500G

Who's running Kamikaze on this hardware and what do I need to do to make
it happen?

Thanks,
  Bryan
_______________________________________________
Melbwireless mailing list
Melbwireless at wireless.org.au
http://wireless.org.au/mailman/listinfo/melbwireless
--
Message  protected by MailGuard: e-mail anti-virus, anti-spam and
content filtering.
http://www.mailguard.com.au/mg