[MLB-WIRELESS] Edimax EW-7206APG / UltraWAP v1.21 Firmware?

[Mike Dickens]

Thanks Rob, I'm the say guy who's been WHIMing you on Whirlpool ;)

I have obtained v1.21, which supposedly allows you to manually set the power
manually. Is this not hosted on the site for obvious reasons or you just
don't have a copy?

Anyway, support sent me my copy, which I've chucked online here:
http://mike.lfi.net/whirlpool/EdiEngEW7206APg_1.21.zip

How can I be sure it's V2 hardware? What would I ask the vendor (which is
Warcom / Paul Warren)
Thanks alot for your reply.

On 5/8/07, Rob Clark <clark at freenet-antennas.com> wrote:
>
>  Mike,
>
> You can get most versions from here:
> http://store.freenet-antennas.com/product_info.php?products_id=218
>  --> Click on Downloads
>
> If you get an EW-7206APg, make sure it has V2 hardware. V2 has a much
> better radio chip (5 dB better RX).
>
> Cheers
>
> Rob
>
>
>  -----Original Message-----
> *From:* melbwireless-bounces at wireless.org.au [mailto:
> melbwireless-bounces at wireless.org.au] *On Behalf Of *Mike Dickens
> *Sent:* Tuesday, May 08, 2007 10:51 AM
> *To:* melbwireless at wireless.org.au
> *Subject:* [MLB-WIRELESS] Edimax EW-7206APG / UltraWAP v1.21 Firmware?
>
> Hey guys,
>
> I'm very new to this, but considering picking up an Edimax AP. Apparently
> if you get v1.21 firmware, you can set the power levels yourself. Now the
> question is, does anyone here have a copy? Because I'm damned if I can find
> it online.
>
> Cheers
> -Mike
> (Down on the Peninsula with no one to connect to ;))
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.6.5/793 - Release Date: 07-May-07
> 2:55 PM
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.6.5/793 - Release Date: 07-May-07
> 2:55 PM
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20070508/872ed03e/attachment.html>