[MLB-WIRELESS] Anyone got their VTS3000X doing anything useful?

[Red_Wolf_2]

The VTS3000X has an H8S/2633 cpu and (it would appear) two serial
interfaces, one for debug, the other for general use with a PDA or the
like...

On 1/30/07, Kim Hawtin <kim.hawtin at adelaide.edu.au> wrote:
> Red_Wolf_2 wrote:
> > I've been looking at the unit a bit, but still no success here either.
> > Im thinking that if I could get the right connectors, I would try my
> > hand at interfacing the GPS and GPRS modules without the VTS3000X
> > board, the problem is finding the suitable connectors (the gps module
> > uses a connector with the same sized pins as a laptop hard drive,
> > while the gprs modem uses two different connectors, either a ribbon
> > cable or something with the dimensions of a CF or PCMCIA card
> > connector, pinwise). Certainly if the opportunity arose, I would be
> > happier to use the unit as it was (if someone got MCGView or whatever
> > its called), otherwise it will probably gather dust for a while in a
> > cupboard until I get the appropriate connectors for the modules...
> >
> > Does anyone know how the gateway system might work? apparently the
> > endpoint the VTS3000X connects to is custom as well... Maybe this
> > could be coded around if its a software thing?
>
> Does it use serial?
>
> Whats the chipset for the device?
>
> cheers,
>
> Kim
> --
> Operating Systems, Services and Operations
> Information Technology Services, The University of Adelaide
> kim.hawtin at adelaide.edu.au
> _______________________________________________
> Melbwireless mailing list
> Melbwireless at wireless.org.au
> http://wireless.org.au/mailman/listinfo/melbwireless
>