[MLB-WIRELESS] Wrap 1-2 boards + cases.

[Steven Haigh]

Hi all,

I'm looking at making up a router to replace my existing Cisco 2611  
and wondering if anyone has used the WRAP 1E-2 boards?

If so, does anyone have any info on what kind of throughput these  
units get between the 3 interfaces? Are they 10 or 100Mbit interfaces?

I was thinking of making something with our good friend the WRT (using  
OpenWRT of course), however they can only handle about 30-35Mbit of  
traffic when splitting the bridge into VLANs...

I was going to use my 533Mhz Mini-ITX - however the CPU seems to be  
getting really hot these days and crashing the system - enough though  
it's not designed to use a fan on the CPU. I'm tipping it may have  
developed a fault over the last few years as it's sat in my cupboard  
doing nothing...

Does anyone have any other suggestions on hardware I may have overlooked?

I'm trying to use something much quieter, less power hungry and  
smaller than a standard PC... There's enough fan noise coming out of  
my rack as it is :\

-- 
Steven Haigh

Email: netwiz at crc.id.au
Web: http://www.crc.id.au
Phone: (03) 9017 0597 - 0412 935 897