[MLB-WIRELESS] WL-HDD going cheap
Simon Knight
simon.knight at gmail.com
Tue Aug 1 17:24:53 EST 2006
Hi,
Yeah they were looking perfect for our mesh plans here in Adelaide:
safreenet.org
The WL-hdd is much smaller, and also has an RP-SMA connector.
The RP-TNC connector is a lot fatter -> much more painful to waterproof.
$125 is still not too bad, I guess the hunt continues for the ideal OpenWRT AP.
Cheers,
Simon
On 8/1/06, Dan Flett <conhoolio at hotmail.com> wrote:
> Hi Simon,
>
> Unfortunately, the price on these units has gone back up. The cheapest I
> can see them for on staticice.com.au is $125. I emailed Computer Alliance
> and they said the distributor had a special on them that has now ended. A
> great pity; they looked to be a killer Melbourne Wireless Network Router at
> that price.
>
> At the moment I'm hanging my hopes on the $80 Diamond Digital R100 routers
> from dealsdirect.com.au. They have the advantage of having a MiniPCI
> wireless NIC that can be swapped for something better, but their
> disadvantage is the fact that they are twice the size of the WL-HDD - so
> they need a bigger, uglier box and a more sturdy mast to support them. A
> WL-HDD in a small plastic box would happily sit on the top of the flimsiest
> TV antenna mast.
>
> Cheers,
>
> Dan
>
> -------------
> View my blog:
> http://freenetjazz.blogspot.com
>
> > -----Original Message-----
> > From: Simon Knight [mailto:simon.knight at gmail.com]
> > Sent: Sunday, 30 July 2006 9:02 PM
> > To: Dan Flett
> > Cc: mike campion; David Ashburner; Melbourne Wireless
> > Subject: Re: [MLB-WIRELESS] WL-HDD going cheap
> >
> > Anyone seen any good prices on these lately?
> >
> > On 6/29/06, Dan Flett <conhoolio at hotmail.com> wrote:
> > > I've just used the method mentioned on the OpenWRT site to
> > flash the
> > > Freifunk Firmware to a WLHDD. It worked ok - I had to muck around
> > > with the command-line to get the network interfaces right because I
> > > didn't start with the default firmware. The default
> > firmware has an
> > > NVRAM variable called "productid", which in this case
> > should be set to
> > > "WLHDD". OpenWRT and Freifunk detect this variable and set up the
> > > network interfaces appropriately.
> > >
> > > For the record - in the WLHDD the network interfaces are:
> > > Wired Ethernet - eth1
> > > Wireless - eth2
> > > eth0 also exists, but doesn't seem to do anything.
> > >
> > > By default, eth1 and eth2 are bridged together as br0. The
> > Freifunk
> > > firmware has some fancy code to auto-detect the wireless
> > interface and
> > > to separate it out as a "wifi" interface.
> > >
> > > One other thing - for flashing Asus routers the OpenWRT
> > site says you
> > > have to do this:
> > >
> > > tftp> get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null
> > >
> > > to get the firmware to start it's TFTP server and accept
> > firmware images.
> > > I've found you don't have to type all that ASUSSPACELINK
> > stuff. I've
> > > found that you can "get" anything:
> > >
> > > tftp> get A /dev/null
> > >
> > > is sufficient. You can then happily "put" any firmware you
> > want via tftp.
> > >
> > > Cheers,
> > >
> > > Dan
> > >
> > > -------------
> > > View my blog:
> > > http://freenetjazz.blogspot.com
> > >
> > > > -----Original Message-----
> > > > From: melbwireless-bounces at wireless.org.au
> > > > [mailto:melbwireless-bounces at wireless.org.au] On Behalf Of mike
> > > > campion
> > > > Sent: Friday, 16 June 2006 11:59 PM
> > > > To: David Ashburner; Melbourne Wireless
> > > > Subject: Re: [MLB-WIRELESS] WL-HDD going cheap
> > > >
> > > > I have flashed a few of these with no problems using the
> > procedure
> > > > on the openwrt site
> > > >
> > http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/Flashing , ensure
> > > > you are directly connected to the wl-hdd and not through a switch
> > > > and also use the TFTP with control commands method.
> > > >
> > > > I have also found that if you take too long to issue the tftp
> > > > command the transfer will not work and you have to start
> > from scratch.
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > > ---- Original Message -----
> > > > From: "David Ashburner" <d_ashburner at hotmail.com>
> > > > To: "Melbourne Wireless" <melbwireless at melbournewireless.org.au>
> > > > Sent: Friday, June 16, 2006 3:11 PM
> > > > Subject: Re: [MLB-WIRELESS] WL-HDD going cheap
> > > >
> > > >
> > > > > OK, so I got a couple of these but am having trouble
> > > > flashing them with
> > > > > OpenWrt.
> > > > >
> > > > > I checked the instructions on the web site and have tried doing
> > > > > the
> > > > > following:
> > > > > use xxx4mb.trx file
> > > > > set it in recovery mode by holding the reset button while
> > > > powering on
> > > > > I can ping it at 192.168.1.220 but when I start the tftp
> > > > transfer it
> > > > > dosen't respond.
> > > > >
> > > > > At the last meeting Ratbaggy mentioned something about
> > > > using the right
> > > > > network switch speed but I can't remember what he said.
> > > > > Regardless of what I plug this thing into only the 10x
> > > > light comes on
> > > > > the RJ45 the 100x flashes a couple of times while it is booting
> > > > > but It won't negotiate to the higher speed ( well according to
> > > > the lights
> > > > > on the back )
> > > > >
> > > > > any tips or pointers?
> > > > >
> > > > >
> > > > > On May 30, 2006, at 7:00 PM, Dan Flett wrote:
> > > > >
> > > > >> Hi Guys,
> > > > >>
> > > > >> I discovered the WL-HDD has had a drop in price recently.
> > > > There are
> > > > >> $69
> > > > >> here:
> > > > >>
> > > > >> http://www.computeralliance.com.au/parts.aspx?qryPart=4698
> > > > >>
> > > > >> They have a standard Broadcom radio, integrated, which
> > isn't great.
> > > > >> But at
> > > > >> $69 you can't complain. They are confirmed to run
> > > > OpenWRT, they have
> > > > >> 4MB
> > > > >> Flash and 16MB RAM, and they are physically slightly
> > > > smaller than a VHS
> > > > >> tape. If you've got a spare 2.5 inch HDD lying around
> > > > then all of a
> > > > >> sudden
> > > > >> you've got heaps of storage space. And it has USB too.
> > > > >>
> > > > >> Now to find a suitably-sized outdoor enclosure! :)
> > > > >>
> > > > >> Does the drop in price mean that EoL is coming?
> > > > >>
> > > > >> Also, this place sells cheap 9dB indoor antennas:
> > > > >>
> > > > >> http://stores.ebay.com.au/confero24-com-Wireless-Shop
> > > > >>
> > > > >> I've had one of these on Ratbaggy's return-loss analyser
> > > > and it came
> > > > >> up with
> > > > >> very good figures - so in this case cheap doen't mean nasty.
> > > > >>
> > > > >> So add one of these antennas to the WL-HDD, stick them
> > > > both inside a
> > > > >> waterproof enclosure and you might be able to make yourself a
> > > > >> reasonable outdoor AP/Router for less than $150.
> > > > >>
> > > > >> Cheers,
> > > > >>
> > > > >> Dan
> > > > >>
> > > > >>
> > > > >> _______________________________________________
> > > > >> Melbwireless mailing list
> > > > >> Melbwireless at wireless.org.au
> > > > >> http://wireless.org.au/mailman/listinfo/melbwireless
> > > > >>
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Melbwireless mailing list
> > > > > Melbwireless at wireless.org.au
> > > > > http://wireless.org.au/mailman/listinfo/melbwireless
> > > > >
> > > >
> > > > _______________________________________________
> > > > Melbwireless mailing list
> > > > Melbwireless at wireless.org.au
> > > > http://wireless.org.au/mailman/listinfo/melbwireless
> > > >
> > > _______________________________________________
> > > Melbwireless mailing list
> > > Melbwireless at wireless.org.au
> > > http://wireless.org.au/mailman/listinfo/melbwireless
> > >
> >
>
>
More information about the Melbwireless
mailing list