[MLB-WIRELESS] eth0,1,2

[Brenton D.]

is that hp card a 100VG anylan card?
----- Original Message ----- 
From: "Simon Hall" <simon.hall at getstarted.com.au>
To: "Daryl Knight" <spectre at australiaonline.net.au>; 
<melbwireless at wireless.org.au>
Sent: Sunday, November 06, 2005 1:39 PM
Subject: Re: [MLB-WIRELESS] eth0,1,2


> Hi
> Like Rick suggested try another PCI slot, but if you only have three you 
> might be snookered there.  You may be able to do one of thes two things 
> that might help.
> Check the Bios and see if you can allocate interrupts to individual PCI 
> slots or if you have the diag/setup software for the cards in question you 
> may be able to alter on the NIC itself.
>
> Cheers
> Simon Hall
>
> ----- Original Message ----- 
> From: "Daryl Knight" <spectre at australiaonline.net.au>
> To: <melbwireless at wireless.org.au>
> Sent: Sunday, November 06, 2005 11:03 AM
> Subject: [MLB-WIRELESS] eth0,1,2
>
>
>> Greetings,
>> Having a little trouble shoving 3 ethernet cards into an old BX
>> motherboard.  (Sometimes I wonder why I do these things)  I have a 
>> problem
>> in so far as there are 3 different card, an onboard eepro100 which 
>> insists
>> on using irq10, an HPVG which also wants to insist on using IRQ10 and a
>> realtek 8139 which pops up at IRQ11 nicely... the two on IRQ10 are 
>> working
>> although it produces plenty of errors.  But nothing I can do seems to be
>> able to shift the IRQ allocation.
>>
>> Any ideas?
>>
>> Anon, Daryl
>>
>>
>> To unsubscribe: send mail to majordomo at wireless.org.au
>> with "unsubscribe melbwireless" in the body of the message
>>
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 
>> 05/11/2005
>>
>>
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
> 


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message