[MLB-WIRELESS] Do not install release 2.5.4 on any AP-600b or AP-2000 with 11b radio cards.
John McClumpha
john at incitegraphics.com.au
Sun May 22 09:07:59 EST 2005
From Proxim website:
Tech Bulletin *Issue with Release 2.5.4*
*WARNING*
Do not install release 2.5.4 on any AP-600b or AP-2000 with 11b radio cards.
*Introduction*
First, we apologies for the inconvenience this condition may have caused
and want to assure you that we will do everything we can to correct this
condition in a rapid manner.
We have discovered a situation where an AP-600b or an AP-2000 with the
11b radio card using version 2.5.4 might cause a failure condition. If
you have this condition with these products and are using release 2.5.4,
please click here
<http://support.proxim.com/cgi-bin/proxim.cfg/php/enduser/ask.php?p_sid=fK5vKWFh&p_lva=&p_sp=&p_li=> to
Ask a Question or Open an Incident.
*Next Steps*
1.
*If you have an _AP-600b_ with release v2.5.4 and are having trouble*
1.
Please proceed to the Ask a Question or Open an Incident
page since further assistance is required
2.
*If you have an _AP2000 with 11b radio card_ using release v2.5.4
and are have trouble*
1.
You can try to recover the AP2000 by following these steps:
1.
Click here
<http://support.proxim.com/cgi-bin/proxim.cfg/php/enduser/std_adp.php?p_faqid=1221> to visit
the AP-2000 download and documentation page
2.
Download release 2.5.3 and proceed to update the
AP2000 to this release
3.
Reset the AP2000 to "Factory Default
<http://keygen.proxim.com/support/orinoco/ap-2000/2.5.3/AP-2000-UG.pdf#page=126>"
(link to instructions from the User Guide)
4.
Then re-configure your AP2000
Thank you again for your patience and understanding as we work through
this issue. Please contact your Proxim Support Team at for any further
assistnace.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20050522/05ef141f/attachment.html>
More information about the Melbwireless
mailing list