[MLB-WIRELESS] Minitar Problem......try again?

[Mark Aitken]

Hi,

I sent this from my work account but maybe they stopped it???


I am having a problem with my minitar Ap.

I spent quite a bit of time over the weekend reading a case & PoE 
adaptors. When it was finished I placed the good old minitar
into the case and tested it.

I could see it's ssid (Node_GXT_minitar) on Netstumbler, I could 
associate with it, and access PC systems on the LAN side, as
well as access the lapton from the lan side.  But for the life of me I 
could  not access the AP's web interface. I could not scan for
any ip address (apart from all PC/Network equip on my LAN) that linked 
to the Minitar's web interface.  I used Look at Lan.

I did a hard reset, although this took some doing it defaulted back to a 
ssid or "default" which I could still associate with and pass
data through to other systems as before, but no web interface on the 
manual's 192.168.2.1 ip address.

Again using Look at Lan Iscanned.....

192.168.0.0 > 192.168.255.255

and for good measure....

10.10.0.0 > 10.10.255.255

with no luck.

It appears that the web interface must be broken or something in the 
front end corrupted???

Would the "serial port mod" available for minitars allow me a tty 
session access to the unit or would I still require a ip address to "slip"
to it?

Anyone have any ideas?

Regards

Mark

NodeGXT


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 11/03/2005


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message