[MLB-WIRELESS] I have a project.....

[Peter Buncle]

Hi All,
 
The raid controller will most likely be a compaq smart array or possibly
the later smart array 2 
 
Not sure if linux drivers ever came out for these as this was before
compaq / hp started to support
linux.
 
On the plus side they did support sco back then so you never know.
 
The Smart array controller is configured via the smart start cd of which
i may have an older one 
around somewhere having worked with hp/compaq for 10 years plus.
 
Cheers
 
Peter
NodeGUR
 
 
 
From: Tony Langdon (ATC) [mailto:tlangdon at atctraining.com.au]
Sent: Wednesday, 7 December 2005 2:16 PM
To: 'Mark Aitken'; 'melbwireless at wireless.org.au'
Subject: Re: [MLB-WIRELESS] I have a project.....



I have all RH's from 4.2 to FC4.  I am a bit concerned about the linux I
put on it knowing how to run the RAID controller and SMP ability, hence
asking the wealth of knowledge that I know exists within MW. 
 
Later RH, as well as Fedora will recognise the SMP system and install a
SMP kernel with no fuss.  As for the RAID, identify the controller and
look up the hardware related HowTos. 

  _____  

Message protected by MailGuard: e-mail anti-virus, anti-spam and content
filtering.
http://www.mailguard.com.au/mg <http://www.mailguard.com.au/mg>