[MLB-WIRELESS] 2.4Ghz to 900Mhz wireless converter

[David]

The power limit is 1W which is OK, BUT the band width used to get 11Mbps 
would NOT meet Australian spec.
I do not think any amount of paper work and money would get them type 
approved. we only have 915 to 928Mhz where the US have 902 to 928 the 
telco's would be against them.
David

At 22:06 26/04/2004, Ryan Abbenhuys wrote:
>I recall this being brought up before and I recall some people suggesting it
>wouldn't be approved for use in Australia.  And to get it approved would
>require all the technical documentation and stuff and cost money.
>
>....but i might be wrong.
>
>----- Original Message -----
>From: "Peter Buncle" <peter at nmc.net.au>
>To: <melbwireless at melbournewireless.org.au>
>Sent: Monday, April 26, 2004 9:56 PM
>Subject: [MLB-WIRELESS] 2.4Ghz to 900Mhz wireless converter
>
>
> > http://www.rflinx.com/Converters/915_UDC_Series.htm
> >
> >
> > Does anyone happen to know of the restrictions on using this type of
> > converter in australia?
> >
> > Like are the power limits the same , is it allowed etc
> >
> > Cheers
> >
> > Peter
> >
> > --
> > Message protected by MailGuard: e-mail anti-virus, anti-spam and content
>filtering.
> > http://www.mailguard.com.au/mg
> >
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
>
>
>To unsubscribe: send mail to majordomo at wireless.org.au
>with "unsubscribe melbwireless" in the body of the message

           David
           VK3JDA
           Webmaster M&DRC
           www.mdrc.org.au
           CoSysop IRLP node #6300
         VK-ATV Users Group list
         www.groups.yahoo.com/group/vk-atv
           RT-85 list
           www.groups.yahoo.com/group/rt85


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message