[MLB-WIRELESS] Wireless Links at 900Mhz
Tony Langdon
tlangdon at atctraining.com.au
Mon Oct 27 12:46:10 EST 2003
> Can any HAMy's on the list enlighten us as to the restrictions around
> 915Mhz?
915 MHz is available as an unlicenced band in Aus. I think the band is
something like 915 MHz to 928 MHz (anyone else know the exact limits?). The
bottom end is adjacent to GSM phone frequencies.
If you buy such converters, better make sure they're type approved,
otherwise things might get expensive if it's not, and you're found to be
upsetting the local mobile phone service... :-)
Oh, I do notice one slight detail that will derail any attempt to use 915
MHz... 802.11b signals are 22 MHz wide. The available band at 900 MHz is
only 13 MHz wide, so there's no way 802.11b emissions can be legally used
there in Aus... (again, you don't want to start getting into mobile
phones... Good way to wind up with a BIG fine!!!).
IOW, the converter would not only have to convert the frequency, but also
the modulation format (and lower the bitrate) to keep the emission legal.
This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.
Any opinions expressed in this message are those of the individual sender.
To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message
More information about the Melbwireless
mailing list