[MLB-WIRELESS] Routing software for redhat

-|- Hurgh -|- hurgh at oxley.vic.edu.au
Wed May 14 12:19:48 EST 2003 

Ok, I have done my network plan,
Go and have a quick look and if you can suggest what i should do about
routing with my Wireless LAN that would be great.

I have an ip range from MW, so i will use that for the wireless side i
think, but if you have any other sugestions please let me know.

The image is located at
http://www.hurgh.org/images/network/home_network_diagrams.gif
It is only 16.1k or something so it is not a big file.

-|- Hurgh -|-


__________________________
Website: http://www.hurgh.org/
Forums: http://forums.hurgh.org/


----- Original Message ----- 
From: "-|- Hurgh -|-" <hurgh at oxley.vic.edu.au>
To: <melbwireless at wireless.org.au>
Sent: Wednesday, May 14, 2003 10:04 AM
Subject: Re: [MLB-WIRELESS] Routing software for redhat


> Sorry all for the crap diagram, seems that it also got wraped so that
> stuffed it up even more :(
>
> Anyway, later today when i have a free few min, i will draw one up in
paint
> and then upload it somewhere so that you can go and have a look (i wont
send
> an attachment to the list it is ok ;))
>
> More later.
>
> -|- Hurgh -|-
>
>
> __________________________
> Website: http://www.hurgh.org/
> Forums: http://forums.hurgh.org/
>
>
> ----- Original Message ----- 
> From: "Ryan Abbenhuys" <sneeze at alphalink.com.au>
> To: "-|- Hurgh -|-" <hurgh at oxley.vic.edu.au>; "Richard Van Orsouw"
> <Richard.Van.Orsouw at optus.com.au>; <melbwireless at wireless.org.au>
> Sent: Tuesday, May 13, 2003 3:48 PM
> Subject: Re: [MLB-WIRELESS] Routing software for redhat
>
>
> > Dude, couldn't make out that diagram, just do it again in that paint
> > program that comes with windows and attach it to another email to me.
> >
> > I'm probably not as knowledgable about routing etc as others, but i've
> been
> > mucking around with it long enough that I know how to work it out and
> > explain it simply.
> >
> > >Thanks heaps,
> > >
> > >I will go check it out now,
> > >I have installed Zebra, and shorewall and webmin, and will start to do

> > come
> > >config of it, but i was not sure about zebra, so this will help.
> > >I have not got any network diagrams, but i wil attempt some ascii art
> > below
> > >if you are interested.
> > >
> > >(Need to view in Plain Text)
> > >                                -------------------------
> > >----------                |  Existing FBSD Router
> > >  -------                   --------------------
> > >| Internet |---------- | eth0                      eth1| ------------ |
> > HUB
> > >| ----------- | Other Computers |
> > >----------                ------------------------- 
> > ----
> > >---                  ---------------------
> > >
> > >|
> > >
> > >|
> > >
> >
> > >       ---------------------
> > >
> > >|        eth0               |
> > >
> > >| Wireless Router    |
> > >
                                                    Antenna -----------|
> > >eth1 (wireless)      |
> > >
> >
> > >       --------------------
> > >
> > >Now if that worked, all i am after is to give access so that the
wireless
> > >can have access to the internal network but not the internet. So i was
> > >thinking i would give different subnet to the wireless stuff, and allow
> > that
> > >to route on the internal network.
> > >
> > >If anyone would like a more detailed drawing, i would be happy to draw
> > >something up and include other details like subnet mask and IP's
etc....
> > >
> > >Any suggestions are welcome
> > >
> > >-|- Hurgh -|-
> > >
> > >PS If the ascii art does not turn out correctly let me know and i will
do
> > a
> > >proper diagram later. (i am using OE6 and it looks fine in plain text)
> > >
> > >__________________________
> > >Website: http://www.hurgh.org/
> > >Forums: http://forums.hurgh.org/
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >----- Original Message ----- 
> > >From: "Richard Van Orsouw" <Richard.Van.Orsouw at optus.com.au>
> > >To: <melbwireless at wireless.org.au>
> > >Sent: Tuesday, May 13, 2003 2:42 PM
> > >Subject: RE: [MLB-WIRELESS] Routing software for redhat
> > >
> > >
> > >> Hurgh
> > >>
> > >> You should be able to get a version for 2.4, I have it running on
2.4.
> > >>
> > >> Depending on our network setup, you might not need to any dynamic
> > routing.
> > >> Have you got a network diagram so we can check out what you might
> need?.
> > >If
> > >> you like, you can check out
> > >http://melbourne.wireless.org.au/wiki/?Kahless.
> > >> There you will find a network diagram of what I've got setup plus
> > >zebra/ospf
> > >> configs.
> > >>
> > >> Cheers
> > >>
> > >> > ----------
> > >> > From: -|- Hurgh -|-
> > >> > Sent: Tuesday, 13 May 2003 12:04 PM
> > >> > To: melbwireless at wireless.org.au
> > >> > Subject: Re: [MLB-WIRELESS] Routing software for redhat
> > >> >
> > >> > Thanks for the info Richard, i went and had a look at zebra and it
> > seems
> > >> > it
> > >> > is made for the 2.0.* and the 2.2.* linux kernels, and i am using
> > redhat
> > >9
> > >> > which has a 2.4.* kernel, and i dont feel like downgrading.
> > >> >
> > >> > So my new question to the list is, what is the eaisest way to setup
> my
> > >> > redhat9 system as a wireless AP?? I have a network card and a
> wireless
> > >> > card
> > >> > both working, now all i need it some routing and some
> > firewalling/nating
> > >> > so
> > >> > if anyone can tell me the eaisest way to make the config changes
and
> > >what
> > >> > i
> > >> > should do that would be great.
> > >> >
> > >> > -|- Hurgh -|-
> > >> >
> > >> >
> > >> > __________________________
> > >> > Website: http://www.hurgh.org/
> > >> > Forums: http://forums.hurgh.org/
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > ----- Original Message ----- 
> > >> > From: "Richard Van Orsouw" <Richard.Van.Orsouw at optus.com.au>
> > >> > To: <melbwireless at wireless.org.au>
> > >> > Sent: Tuesday, May 13, 2003 10:54 AM
> > >> > Subject: RE: [MLB-WIRELESS] Routing software for redhat
> > >> >
> > >> >
> > >> > > You might be getting firewalling mixed up with routing.
> > >> > > Softwall is used for filtering ( firewalling ).
> > >> > > But if you want routing, zebra is the way to go.
> > >> > >
> > >> > > Cheers,
> > >> > >
> > >> > > Richard.
> > >> > >
> > >> > > > ----------
> > >> > > > From: -|- Hurgh -|-
> > >> > > > Sent: Tuesday, 13 May 2003 10:16 AM
> > >> > > > To: melbwireless at wireless.org.au
> > >> > > > Subject: [MLB-WIRELESS] Routing software for redhat
> > >> > > >
> > >> > > > Just a quick question,
> > >> > > >
> > >> > > > I have gotten my linux install to work with my network cards
and
> > >> > stuff,
> > >> > > > but
> > >> > > > i am not sure what is the best thing to use for routing. I
> > remember
> > >on
> > >> > the
> > >> > > > list a while back that people were suggesting some program but
i
> > >cant
> > >> > > > remember the name of it. I think it was softwall or something
> like
> > >> > that.
> > >> > I
> > >> > > > had a quick look at the mail archive but i could not find
> > anything..
> > >> > > >
> > >> > > > If someone could remind me of the name and maybe even a URL of
> > where
> > >> > the
> > >> > > > software is that would be great. I dont need anything too
> advanced
> > >> > just
> > >> > > > simple to use. I am using Redhat as the OS.
> > >> > > >
> > >> > > > Thanks
> > >> > > >
> > >> > > > -|- Hurgh -|-
> > >> > > >
> > >> > > >
> > >> > > > __________________________
> > >> > > > Website: http://www.hurgh.org/
> > >> > > > Forums: http://forums.hurgh.org/
> > >> > > >
> > >> > > >
> > >> > > > To unsubscribe: send mail to majordomo at wireless.org.au
> > >> > > > with "unsubscribe melbwireless" in the body of the message
> > >> > > >
> > >> > > >
> > >> > >
> > >> > > To unsubscribe: send mail to majordomo at wireless.org.au
> > >> > > with "unsubscribe melbwireless" in the body of the message
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >> > To unsubscribe: send mail to majordomo at wireless.org.au
> > >> > with "unsubscribe melbwireless" in the body of the message
> > >> >
> > >> >
> > >>
> > >> To unsubscribe: send mail to majordomo at wireless.org.au
> > >> with "unsubscribe melbwireless" in the body of the message
> > >>
> > >>
> > >
> > >
> > >To unsubscribe: send mail to majordomo at wireless.org.au
> > >with "unsubscribe melbwireless" in the body of the message
> > >
> > >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
> >
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message

More information about the Melbwireless mailing list