[WG-Routing] RE: [MLB-WIRELESS] lan setup

[Matthew Hill]

All.

further to my emails. All clients are a mix of winxp and win98 machines. all accecss point are not machines, they are accesspoint whether they are dlink 900's or svecs.

Thanks

MAtthew
  ----- Original Message ----- 
  From: Richard Van Orsouw 
  To: Routing Workgroup ; Melbourne Wireless ; 'Matthew Hill' 
  Sent: Wednesday, May 14, 2003 11:28 AM
  Subject: [WG-Routing] RE: [MLB-WIRELESS] lan setup


  Are your client mode access points running linux or bsd ?, if so u could run
  zebra with ospf. This would advertise your cable based networks to the rest
  of the network. Your dlink access point is running in bridged mode so your
  linux/firewall could do route advertising (ospf). If your windows clients
  are 2000/xp they can listen for RIP, so enabling that on your linux/firewall
  will update your 10.10.160.0/28 windows clients routing tables. Now on your
  10.10.160.72/29 network, not sure how your internet is connected to the LAN,
  is it a cable sharer type box ? if it is, you will need to enable RIP on
  that as well as your client mode AP, because at present, there default route
  would be the internet, and they wouldn't know about 10.10.160.62/29 or
  10.10.160.0/28.
   

  > ----------
  > From: Matthew Hill
  > Sent: Wednesday, 14 May 2003 1:55 AM
  > To: Routing Workgroup; Melbourne Wireless
  > Subject: [MLB-WIRELESS] lan setup
  > 
  > Howdy boys and girls
  >  
  > Ive created a rough plan of my lan connected to two other lans via
  > wireless.
  >  
  > All machines have been assigned melbourne wireless ips.
  >  
  > Just looking and planning to get them set up shortly, and making sure
  > routing wont be an issue. Any advice you guys have would be greatly
  > appreciated.
  >  
  > Image at : www.matthewhillonline.com/wireless.html
  >  
  > cheers
  >  
  > Matthew
  > 

  To unsubscribe: send mail to majordomo at wireless.org.au
  with "unsubscribe wgrouting" in the body of the message
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030514/04336d08/attachment.html>