[MLB-WIRELESS] Routing software for redhat

[-|- Hurgh -|-]

Thanks heaps,

I will go check it out now,
I have installed Zebra, and shorewall and webmin, and will start to do come
config of it, but i was not sure about zebra, so this will help.
I have not got any network diagrams, but i wil attempt some ascii art below
if you are interested.

(Need to view in Plain Text)
                                -------------------------
----------                |  Existing FBSD Router
  -------                   --------------------
| Internet |---------- | eth0                      eth1| ------------ | HUB
| ----------- | Other Computers |
----------                -------------------------                     ----
---                  ---------------------

|

|
                                                                            
       ---------------------

|        eth0               |

| Wireless Router    |
                                                     Antenna -----------|
eth1 (wireless)      |
                                                                            
       --------------------

Now if that worked, all i am after is to give access so that the wireless
can have access to the internal network but not the internet. So i was
thinking i would give different subnet to the wireless stuff, and allow that
to route on the internal network.

If anyone would like a more detailed drawing, i would be happy to draw
something up and include other details like subnet mask and IP's etc....

Any suggestions are welcome

-|- Hurgh -|-

PS If the ascii art does not turn out correctly let me know and i will do a
proper diagram later. (i am using OE6 and it looks fine in plain text)

__________________________
Website: http://www.hurgh.org/
Forums: http://forums.hurgh.org/







----- Original Message ----- 
From: "Richard Van Orsouw" <Richard.Van.Orsouw at optus.com.au>
To: <melbwireless at wireless.org.au>
Sent: Tuesday, May 13, 2003 2:42 PM
Subject: RE: [MLB-WIRELESS] Routing software for redhat


> Hurgh
>
> You should be able to get a version for 2.4, I have it running on 2.4.
>
> Depending on our network setup, you might not need to any dynamic routing.
> Have you got a network diagram so we can check out what you might need?.
If
> you like, you can check out
http://melbourne.wireless.org.au/wiki/?Kahless.
> There you will find a network diagram of what I've got setup plus
zebra/ospf
> configs.
>
> Cheers
>
> > ----------
> > From: -|- Hurgh -|-
> > Sent: Tuesday, 13 May 2003 12:04 PM
> > To: melbwireless at wireless.org.au
> > Subject: Re: [MLB-WIRELESS] Routing software for redhat
> >
> > Thanks for the info Richard, i went and had a look at zebra and it seems
> > it
> > is made for the 2.0.* and the 2.2.* linux kernels, and i am using redhat
9
> > which has a 2.4.* kernel, and i dont feel like downgrading.
> >
> > So my new question to the list is, what is the eaisest way to setup my
> > redhat9 system as a wireless AP?? I have a network card and a wireless
> > card
> > both working, now all i need it some routing and some firewalling/nating
> > so
> > if anyone can tell me the eaisest way to make the config changes and
what
> > i
> > should do that would be great.
> >
> > -|- Hurgh -|-
> >
> >
> > __________________________
> > Website: http://www.hurgh.org/
> > Forums: http://forums.hurgh.org/
> >
> >
> >
> >
> > ----- Original Message ----- 
> > From: "Richard Van Orsouw" <Richard.Van.Orsouw at optus.com.au>
> > To: <melbwireless at wireless.org.au>
> > Sent: Tuesday, May 13, 2003 10:54 AM
> > Subject: RE: [MLB-WIRELESS] Routing software for redhat
> >
> >
> > > You might be getting firewalling mixed up with routing.
> > > Softwall is used for filtering ( firewalling ).
> > > But if you want routing, zebra is the way to go.
> > >
> > > Cheers,
> > >
> > > Richard.
> > >
> > > > ----------
> > > > From: -|- Hurgh -|-
> > > > Sent: Tuesday, 13 May 2003 10:16 AM
> > > > To: melbwireless at wireless.org.au
> > > > Subject: [MLB-WIRELESS] Routing software for redhat
> > > >
> > > > Just a quick question,
> > > >
> > > > I have gotten my linux install to work with my network cards and
> > stuff,
> > > > but
> > > > i am not sure what is the best thing to use for routing. I remember
on
> > the
> > > > list a while back that people were suggesting some program but i
cant
> > > > remember the name of it. I think it was softwall or something like
> > that.
> > I
> > > > had a quick look at the mail archive but i could not find anything..
> > > >
> > > > If someone could remind me of the name and maybe even a URL of where
> > the
> > > > software is that would be great. I dont need anything too advanced
> > just
> > > > simple to use. I am using Redhat as the OS.
> > > >
> > > > Thanks
> > > >
> > > > -|- Hurgh -|-
> > > >
> > > >
> > > > __________________________
> > > > Website: http://www.hurgh.org/
> > > > Forums: http://forums.hurgh.org/
> > > >
> > > >
> > > > To unsubscribe: send mail to majordomo at wireless.org.au
> > > > with "unsubscribe melbwireless" in the body of the message
> > > >
> > > >
> > >
> > > To unsubscribe: send mail to majordomo at wireless.org.au
> > > with "unsubscribe melbwireless" in the body of the message
> > >
> > >
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
> >
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message