[MLB-WIRELESS] Re: [WG-Routing] ap ip numbers.

[Jason Brice]

Nice. thats almost exactly the system i use. except for 20 or so IP's
reserved for printers.
 
 

	-----Original Message-----
	From: Dave Keller [mailto:david at bay.net.au] 
	Sent: Sunday, 11 May 2003 12:05 PM
	To: Matthew Hill; Peninsula Wireless; Melbourne Wireless;
Routing Workgroup
	Subject: [MLB-WIRELESS] Re: [WG-Routing] ap ip numbers.
	
	
	Hi Mathew,
	 
	It really depends on the local ip addressing policys of your
site.  But most likely it would go along side any Layer 2 or just stick
it with your routers in the addressing space. 
	 
	For example, you could have something like this:-
	 
	192.168.0.1 default gateway router
	192.168.0.2 - 192.168.0.9 other layer 3 routing devices
	192.168.0.10 - 192.168.0.29 layer 2 devices, switches,bridges,
ap's etc
	192.168.0.30 - 192.168.0.49  servers etc
	192.168.0.50 - 192.168.0.199 DHCP assigned address space
	192.168.0.200 - 192.168.0.250 static address assignment for
users that must have fixed ips.
	192.168.0.251 - 192.168.0.254 temporary admin assigned test
gear. eg sniffers.
	 
	Ciao
	Dave 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030512/5cb82e5b/attachment.html>