[MLB-WIRELESS] Need HELP please!!!

[Ryan Abbenhuys]

Best thing for him to do is remove PCMCIA support from the kernel
alltogether.  Enable wireless network interface support but not enable any
drivers.
Then download the latest PCMCIA-CS package from sourceforge and compile and
install this

then setup the /etc/pcmcia/networks.opts and /etc/pcmcia/wireless.opts
files

then you don't need to setup a eth?-cfg file in
/etc/sysconfind/network-scripts/ because the network.opts file does all
this for you when the PCMCIA service starts.


>One thing I noticed is that the lines I've left below don't go in
>ifcfg-xxxx, they go into your /etc/pcmcia/wireless.opts file. Take a look
at
>the entries already there to see how to add an entry for your 350 card.
>
>> This is the setup of ifcfg-eth1 on both machines (yes each machine has
>diff
>> ip just cant be fagged putting seperate ones in for each machine)
>>
>
><snip correct stuff>
>
>> ESSID=test
>> MODE=Ad-Hoc
>> RATE=auto
>> CHANNEL=11
>
>Also the lines below aren't necessary.
>
>> TYPE=wireless
>> HWADDR=00:0c:30:d4:b0:f4
>
>
>To unsubscribe: send mail to majordomo at wireless.org.au
>with "unsubscribe melbwireless" in the body of the message
>
>

To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message