[MLB-WIRELESS] OSPFD/ZEBRA
Ryan Abbenhuys
sneeze at alphalink.com.au
Mon Jun 30 15:26:32 EST 2003
Yes those are the addresses that most people need for AP's and the such.
However anyone participating in the major backbone links requires an
address from a 172.16.x.x range.
These are given to you by locfinder if you request an IP for a
Point-To-Point interface.
The original idea that WGrouting came up with was to use /32 (single IP) on
these interfaces and setup appropriate host routes to create the links.
Unfortunatelly I don't think this was tested with Ospfd/Zebra before it was
decided. :-\
Locfinder developers out there may need to alter it if possible to dish out
/30's instead.
>Doesn't locfinder give out /28 addresses?, giving 14 usable ips. The only
>thing left to do is to use the broadcast option in ifconfig otherwise it
>will use the default broadcast address for that class. For example, my
>subnet is 10.10.32.80/28, so in ifconfig you would setup the interface
with
>the following....
>
>ifconfig eth0 10.10.32.81/28 broadcast 10.10.32.95
>
>Cheers,
>
>Richard.
>
>> ----------
>> From: Ryan Abbenhuys
>> Reply To: sneeze at alphalink.com.au
>> Sent: Monday, 30 June 2003 1:12 PM
>> To: melbwireless at wireless.org.au
>> Subject: [MLB-WIRELESS] OSPFD/ZEBRA
>>
>> Just thought I'd let everyone know....(before they spend 12 months
trying
>> to figure it out like me), that it appears that Ospfd has issues
>> transmitting routes over /32 addresses. (255.255.255.255) using host
>> routes.
>>
>> So the routing addresses that Locfinder issues for routing nodes aren't
>> much use. Instead, perhaps do what I have done, and use a /30 which
gives
>> you a subnet with 2 useable IP's, this seems to work no problems.
>>
>> PS: big thanks to andrewG for helping me sort this out.
>>
>> To unsubscribe: send mail to majordomo at wireless.org.au
>> with "unsubscribe melbwireless" in the body of the message
>>
>>
>
>To unsubscribe: send mail to majordomo at wireless.org.au
>with "unsubscribe melbwireless" in the body of the message
>
>
To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message
More information about the Melbwireless
mailing list