[MLB-WIRELESS] Re: DLink 900+ SMA- N coneector and 200mw access piont

[rik]

and the 100mw mod for the 900 voided the warentee as well

have you got the latest firmware? what antenna are you useing? the power vs
gain argument is always put forward and gain 98% of the time wins

get a better antenna


----- Original Message ----- 
From: <mrviper at softhome.net>
To: "vak" <vak at alphalink.com.au>; "Melbwireless"
<melbwireless at wireless.org.au>
Sent: Wednesday, June 11, 2003 3:02 PM
Subject: [MLB-WIRELESS] Re: DLink 900+ SMA- N coneector and 200mw access
piont


> Yeah i already have a pigtail but the Dlink is so weak every DB i can save
> is a bonus i mean comon 38mw what a joke the old 900 with a hack was like
> 100mw or something. Amps are way to expensive Can that 200mw Verteich or
> something like that act as an access piont?
> vak writes:
>
> > Hi Ryan,
> >
> > In short, don't waste your time - you will not increase your gain
substantially
> > enough to make any difference.
> >
> > I have done a mod to the 900+ which involves removing the little pigtail
and
> > directly replacing it with a PCB mount SMA connector.
> >
> > The cost of the conversion will outweight the gain increase, plus void
any
> > warranty you might have left on the unit.
> >
> > Note: Sticking an N connector directly onto a thin PCB, or via a direct
> > soldered pigtail requires a lot of extra modding & support so that you
don't
> > lift the pcb tracks off the substrate.
> >
> > Pigtails can be bought for around $27 - $35. If you're going to use it
outside,
> > make sure you use waterproof cable (ie Polyethylene sheath).
> >
> > Vaskos
> > ---------- 
> >
> > mrviper at softhome.net wrote:
> >
> >> Hello
> >> Im planning on getting rid of the rp sma connector and adding a N male.
To
> >> avoid loss that a rg58 piig tail will produce. Has anyone done this?
> >> and how would the dlink go if I were to add a N male to the Internal
Silver
> >> 650 card awell.
> >>
> >> Thanks Guys - Ryan
> >>
> >> To unsubscribe: send mail to majordomo at wireless.org.au
> >> with "unsubscribe melbwireless" in the body of the message
>
>
>
> =========================================
> Signature:
> Plz vist the site http://www.burnfuel.com
> =========================================
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message