[MLB-WIRELESS] POE for SVEC AP

[Ben Holko]

mine has no problems with throuhgput or packet loss over medium distances -
I tested across a 2 meter CAT5 lead, and also a 12 meter lead, and got
2.3mbps transfer rate in either case (http transfer of one 17MB file) - of
course over longer distances I'd expect things to get fuzzy....

B.


-----Original Message-----
From: owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au]On Behalf Of Jamie Moir
Sent: Wednesday, June 11, 2003 12:32 PM
Cc: Melbourne Wireless
Subject: Re: [MLB-WIRELESS] POE for SVEC AP



On Wed, 11 Jun 2003, Dan Flett wrote:

> Hi Brandon,
>
> I've made a POE kit for my SVEC APs.  It's based on the one on the
> NYCwireless site here: http://www.nycwireless.net/poe/

I used that, but made it an active POE using that reg kit from altronics,
although in the future I think Id just use this sample circut from here
myself;

http://cache.national.com/ds/LM/LM340.pdf

(Rob Clark pointed me at it, and while we are on the subject of RC he
found that voltage drop seriously affected the performance of these units
or his WET11, I forget which)

This will allow you to get over the length/undervoltage problems, of
course you will also need a new gruntier 12v powerpack.

Cya,

Jamie


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message




To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message