[MLB-WIRELESS] replacement for a dlink900+

[rick]

ryan i just dont understand why some pings would work and others wouldnt,
wouldnt it be a constant?


----- Original Message ----- 
From: "Ryan McMullan" <bazil at dodo.com.au>
To: <melbwireless at wireless.org.au>
Sent: Thursday, July 17, 2003 10:22 AM
Subject: Re: [MLB-WIRELESS] replacement for a dlink900+


> If I recall correctly, you were using power over ethernet?
>
> Have you checked the cable run up to your AP?
>
> Ryan
> ----- Original Message -----
> From: "rick" <mibz at optushome.com.au>
> To: "Melb Wireless" <melbwireless at wireless.org.au>
> Sent: Wednesday, July 16, 2003 11:54 PM
> Subject: [MLB-WIRELESS] replacement for a dlink900+
>
>
> > i seam to be having alot of problems with my dlink900+ im after
something
> i
> > can have full control thru a web interface like the dlink900+ it doesnt
> have
> > to be 22mb
> >
> > there is NOTHING wrong with the wireless side only with the eth side
where
> > im getting alot of loss
> >
> > any ideas (see below for pings)
> >
> > Pinging 10.10.144.130 with 32 bytes of data:
> >
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Request timed out.
> > Request timed out.
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Request timed out.
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Request timed out.
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> > Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> >
> > Ping statistics for 10.10.144.130:
> >     Packets: Sent = 14, Received = 10, Lost = 4 (28% loss),
> > Approximate round trip times in milli-seconds:
> >     Minimum = 0ms, Maximum = 0ms, Average = 0ms
> > Control-C
> > ^C
> > C:\Documents and Settings\rik>
> >
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
> >
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message