[MLB-WIRELESS] Routing issue

[Nath P]

MessageMaybe you just need to set the Gateway in the AP to 10.10.160.9, wouldnt that make it the default route?

----- Original Message ----- 
  From: Matthew Hill 
  To: Tom Sykes ; Melbourne Wireless 
  Sent: Saturday, July 12, 2003 2:25 PM
  Subject: Re: [MLB-WIRELESS] Routing issue


  Tom

  There is notthing in the ap config that i can set a default route or any type of route to.

  is a svec ap bought of the bulk, recently with firmware version 0.0.1.16. and ap util version 0.0.5.2

  Maybe i have to upgrade those settings access routing issues.


  Any ideas anyone ???

  Cheers

  MAtt
  ----- Original Message ----- 
    From: Tom Sykes 
    To: 'Matthew Hill' 
    Sent: Saturday, July 12, 2003 2:16 PM
    Subject: RE: [MLB-WIRELESS] Routing issue


    That will be the issue, as the AP has no route back to your lan. Can you set any other routes - like a normal static route to tell it where your LAN is?

    TS
      -----Original Message-----
      From: Matthew Hill [mailto:mhill at satlink.com.au] 
      Sent: Saturday, 12 July 2003 2:13 PM
      To: Tom Sykes
      Subject: Re: [MLB-WIRELESS] Routing issue


      I cant apear to set a default route of the ap, its a svec ap.

      matt

      ----- Original Message ----- 
        From: Tom Sykes 
        To: 'Matthew Hill' 
        Sent: Friday, July 11, 2003 11:07 PM
        Subject: RE: [MLB-WIRELESS] Routing issue


        What's the default route of the AP at 10.10.160.10?

        It will need to be defaulted to 10.10.160.9


        -----Original Message-----
        From: owner-melbwireless at wireless.org.au
        [mailto:owner-melbwireless at wireless.org.au] On Behalf Of Matthew Hill
        Sent: Friday, 11 July 2003 10:25 PM
        To: Melbourne Wireless
        Subject: [MLB-WIRELESS] Routing issue


        Gudday and Help.

        got a small lan running on 10.10.160.0/29 and on my linuux box i have a
        second eth card 10.10.160.9/29 with my ap 10.10.160.10 plugged straight
        into via xover cable.

        now from any machine i can see 10.10.160.9 but cant see .10 

        l;inux routing is as follows

        Destination     Gateway         Genmask         Flags Metric Ref    Use
        Iface
        acc11-dryb-mel. *               255.255.255.255 UH    0      0        0
        ppp0
        10.10.160.8     *               255.255.255.248 U     0      0        0
        eth1
        10.10.160.0     *               255.255.255.248 U     0      0        0
        eth0
        127.0.0.0       *               255.0.0.0       U     0      0        0
        lo
        default         acc11-dryb-mel. 0.0.0.0         UG    0      0        0
        ppp0


        hope this can be helped

        cheers

        matt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030712/802e465a/attachment.html>