[MLB-WIRELESS] Making a roof mounted antenna easily removable?

[bchild at mail.wireless.org.au]

technically speaking two sleeves are better then 1, though I've had a mast
of 6mtrs with a 600mm joining sleeve on the inside using 2 bolts to hold 1
section of pipe to the sleeve.  Has been proven to work..

> Thanks for the feedback, but height is not really the issue. Something
> to mount an antenna to is better than nothing, regardless of the height.
> Too high means more stress on the mounting points, so 3 meters is fine
> with me. :) I suggest people need to check their local councils to the
> bylaws that apply to them.
>
>  As for the suggestion, any reason for two sleves if I wanted an outer
> sleve
> but only one if I went an internal one?
>
>  I would have thought that a larger diameter outer sleve would have been
> stronger than a smaller diameter inner one? But I'm no engineer :P
>
> Regards,
> Gaz.




To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message