[MLB-WIRELESS] mounting a AP

[rik]

you take pics of it while you did it?


----- Original Message -----
From: "Jason X" <jxuereb at optushome.com.au>
To: "rik" <mibz at optushome.com.au>; "'melbwireless'"
<melbwireless at wireless.org.au>
Sent: Thursday, April 24, 2003 12:53 AM
Subject: Re: [MLB-WIRELESS] mounting a AP


> Hey dude,
>
> All I did was drilled three holes for
>
> 1 x pigtail
> 1 x rj45
> 1 x power
>
> Got grommets and drilled the holes for the gromets.
>
> Also got two U-Bolts and drilled holes for these. I used 4 grommets under
> neath the washers to make sure water wouldnt get it when you screwed it
up.
>
> Inserted AP wired it all up. Then silconed the outside of the grommets to
> make sure water wouldn't get it. Then I taped up all the seales and over
the
> grommets.
>
> You might want to drill the holes at the bottom. Cause water can't defity
> gravity and go up (so mikey says).
>
> My box had a seal on it so was water proof anyways.
>
> Cheers
> Jason
>
>
> ----- Original Message -----
> From: "rik" <mibz at optushome.com.au>
> To: "'melbwireless'" <melbwireless at wireless.org.au>
> Sent: Thursday, April 24, 2003 12:34 AM
> Subject: [MLB-WIRELESS] mounting a AP
>
>
> > so i have the box for the ap i have the ap i have the pigtail i have the
> > power and eth cable now how do i mount it on the mast?
> >
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message