[MLB-WIRELESS] Fwd: passive reflectors

[evilbunny]

-- 
Best regards,
 evilbunny                            mailto:evilbunny at sydneywireless.com

http://www.SydneyWireless.com - Exercise your communications
freedom to make it do what you never thought possible... 

This is a forwarded message
From: robert scholten <rscholten2000 at yahoo.com>
To: wireless at lists.samba.org
Date: Monday, June 10, 2002, 8:01:53 AM
Subject: passive reflectors

===8<==============Original message text===============

This passive reflector stuff is baloney.  It's basic inverse-square law.

Consider a setup with 2 dishes, e.g. 24dB Conifers.  Beam widths are
7.5 and 10 degrees (-3dB widths).  Area is about 0.5m^2.

Imagine you have a really good link with two 24dB dishes over 5 miles
= 8km.  Let's say you get 1 nanowatt (i.e. -60dBm).  I've managed
about -80dBm from a good site with two 24dB dishes, one site on the
side of a small mountain, the other on the plains, length about 20km.
That translates to -73dBm for 8km, but let's be generous to Cringely.

Now let's put a passive reflector at that point, instead of a single
dish.  I.e. a reflector consisting not of Pringles tins, but good 24dB
dishes with zero loss cable between them.  Ignore the fact that both
dishes in the reflector will radiate (i.e. instant 3dB loss).  So the
second dish re-radiates 1nW of power into a "cone" of 7.5 x 10
degrees.     

That power is spread over an area of approx. d*tan(a1)*tan(a2) where
a1 and a2 are the angles, 7.5 and 10 degrees.  At 1000m (again, let's
be generous to Cringely and assume 1.5 miles is 1000m!).  The power is
spread into 23000m^2 so at our final 24dB dish we have 0.5/23000 * 1nW
= 2e-14 watts, or about -107dBm.  More realistically you should use
-73dBm at the repeater, include at least 3dB loss in the repeater, add
another 3dB because he's 1.5 miles away from the mountain (2km), and
come up with a very optimistic -119dBm.  The best cards (Cisco 350's)
are good down to about -94dB so it's pretty much irrelevant anyway.

How big would Cringely's pringles tins need to be to make it work?
Optimistically he'd need an extra 11dB, i.e. 5dB on each side, so 30dB
(about 1.5m^2).  More realistically he'd be needing a good 25dB,
12.5dB per side, 9m^2.  Dishes of 3.4 m diameter (about 11 feet).

Forget it!

 

 

 
To: Eqeeu <eqeeu at yahoo.com>Cc: wireless at lists.samba.orgSubject: Piercing a mountain? Help!
Eqeeu writes: > Hi >  > I want to setup a 802.11b link between my house and a > friends, the only problem is that there is a large > mountain (I think its Ainslie mountain) smack in the > middle of our two houses and its impossible to get > line of site. >  > Is this a problem? >  > Would we have to go around or over the mountain with > an extra repeater WAP somewhere, or is it possible to > use two high gain 24dBi+ directional antenna and > "pierce" straight through the centre of the mountain? > 
An article on doing passive repeaters is at :
 http://www.pbs.org/cringely/pulpit/pulpit20020207.html.
I think you can get more doco. from there.
wes


---------------------------------
Do You Yahoo!?
Sign-up for Video Highlights of 2002 FIFA World Cup

===8<===========End of original message text===========
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 1966 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20020903/6cd8488b/attachment.p7s>