[MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?

[evilbunny]

Hello Andrew,

I'm yet to see a speeding ticket for $1mill/day :)

-- 
Best regards,
 evilbunny                            mailto:evilbunny at sydneywireless.com

http://www.SydneyWireless.com - Exercise your communications
freedom to make it do what you never thought possible... 

Wednesday, June 26, 2002, 10:05:03 PM, you wrote:

AD> hahah pfft legal shmegal... its also illigal to go over the speed limit...
AD> anyone who _never_ speeds? :)

AD> i'm not planning on doing it, i'd probably try to get one of those microtek
AD> 200mw prism3 cards if i wanted to do it rather than an amp...


AD> ----- Original Message -----
AD> From: "evilbunny" <evilbunny at sydneywireless.com>
AD> To: "Andrew Dean" <ferni at shafted.com.au>
AD> Cc: "melbwireless" <melbwireless at wireless.org.au>
AD> Sent: Wednesday, June 26, 2002 9:54 PM
AD> Subject: Re[6]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?


>> Hello Andrew,
>>
>> 500mW = 27dBm
>>
>> 27+15+8 = 50dBm or... 100W :)
>> or if you have a cisco it's 130W ;)
>>
>> I some how doubt you could make that legal without wasting a lot of RX
>> and making the whole thing pointless :)
>>
>> --
>> Best regards,
>>  evilbunny                            mailto:evilbunny at sydneywireless.com
>>
>> http://www.SydneyWireless.com - Exercise your communications
>> freedom to make it do what you never thought possible...
>>
>> Wednesday, June 26, 2002, 9:52:44 PM, you wrote:
>>
>> AD> 3 degree beam width.. i think that 8dBi omni i ordered of TIB from
AD> superpass
>> AD> is 18deg beam width?
>>
>> AD> you can see where i was coming from saying an amp (2 way?) + this
AD> would be
>> AD> better ?
>>
>> AD> i thought you could get 500mw amps for 200-300 dollars, not sure
AD> tho....
>>
>>
>>
>> AD> ----- Original Message -----
>> AD> From: "evilbunny" <evilbunny at sydneywireless.com>
>> AD> To: "Andrew Dean" <ferni at shafted.com.au>
>> AD> Cc: "melbwireless" <melbwireless at wireless.org.au>
>> AD> Sent: Wednesday, June 26, 2002 9:44 PM
>> AD> Subject: Re[4]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested
AD> ?
>>
>>
>> >> Hello Andrew,
>> >>
>> >> Quick search on google 15.4 dBi omni's has a 3 degree beam width...
>> >> 175cm long and about 1kg in weight, rated at 216Km/hr
>> >>
>> >> http://www.firstmilewireless.com/prod_ant2ov15.html
>> >>
>> >> For the vertical plane plot etc...
>> >>
>> >> --
>> >> Best regards,
>> >>  evilbunny
AD> mailto:evilbunny at sydneywireless.com
>> >>
>> >> http://www.SydneyWireless.com - Exercise your communications
>> >> freedom to make it do what you never thought possible...
>> >>
>> >> Wednesday, June 26, 2002, 9:29:54 PM, you wrote:
>> >>
>> >> AD> sorry eveilbunny, i dunno the details
>> >>
>> >> AD> all i know is the antennas dont actually create more power, they
AD> just
>> AD> focus
>> >> AD> the power of the card in a certain direction...
>> >>
>> >> AD> ....
>> >> AD> ----- Original Message -----
>> >> AD> From: "evilbunny" <evilbunny at sydneywireless.com>
>> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
>> >> AD> Sent: Wednesday, June 26, 2002 9:10 PM
>> >> AD> Subject: Re[2]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone
AD> interested
>> AD> ?
>> >>
>> >>
>> >> >> Hello Andrew,
>> >> >>
>> >> >> Which is what my previous question was, how small is the beam width?
>> >> >>
>> >> >> --
>> >> >> Best regards,
>> >> >>  evilbunny
>> AD> mailto:evilbunny at sydneywireless.com
>> >> >>
>> >> >> http://www.SydneyWireless.com - Exercise your communications
>> >> >> freedom to make it do what you never thought possible...
>> >> >>
>> >> >> Wednesday, June 26, 2002, 8:39:39 PM, you wrote:
>> >> >>
>> >> >> AD> I'm not 100% on it but as far as I know the higher the gain of
AD> an
>> AD> omni
>> >> AD> the
>> >> >> AD> flatter the signal, like a pancake flat :)
>> >> >>
>> >> >> AD> which is good if you are on the same level as the omni.. but if
>> AD> your
>> >> AD> below
>> >> >> AD> it or above it... etc.. you won't get a signal.... with a lower
>> AD> gain
>> >> AD> omni
>> >> >> AD> then the signal kinda doesn't go as far... but is more spread
AD> out
>> >> >> AD> vertically....
>> >> >>
>> >> >> AD> someone feel free to correct me if I have it wrong?
>> >> >>
>> >> >> AD> Ferni
>> >> >> AD> ----- Original Message -----
>> >> >> AD> From: "vak" <vak at alphalink.com.au>
>> >> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
>> >> >> AD> Sent: Wednesday, June 26, 2002 8:33 PM
>> >> >> AD> Subject: Re: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone
AD> interested
>> AD> ?
>> >> >>
>> >> >>
>> >> >> >> Do you mean that the signal density is three dimensionally flat ?
>> >> >> >>
>> >> >> >> Vaskos
>> >> >> >> ---------
>> >> >> >>
>> >> >> >> Drew wrote:
>> >> >> >>
>> >> >> >> > vak wrote:
>> >> >> >> >
>> >> >> >> > >Nup, not flat range at all.
>> >> >> >> > >
>> >> >> >> > 15.4dbi is about as flat as an omni gets.
>> >> >> >> >
>> >> >> >> > D
>> >> >> >> >
>> >> >> >> > To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> >> > with "unsubscribe melbwireless" in the body of the message
>> >> >> >>
>> >> >> >>
>> >> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> >> with "unsubscribe melbwireless" in the body of the message
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >> AD> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> AD> with "unsubscribe melbwireless" in the body of the message
>> >> >>
>> >> >>
>> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> with "unsubscribe melbwireless" in the body of the message
>> >> >>
>> >> >>
>> >>
>> >>
>> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> with "unsubscribe melbwireless" in the body of the message
>> >>
>> >>
>>
>>
>> To unsubscribe: send mail to majordomo at wireless.org.au
>> with "unsubscribe melbwireless" in the body of the message
>>
>>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message