[MLB-WIRELESS] Ricoh PCI adapter problems in Win2K - HELP

[Bradley Dwyer]

Sorry about the confusion, here is the setup.

PC #1: Laptop w/ Wireless network card
PC #2: Desktop w/ Wireless network card in PCI cradle

PC #1 can see the wireless network card in PC #2 (using
Netstumbler/Enterasys LinkTest).
PC #2 can NOT see the wireless network card in PC #1 (using
Netstumbler/Entrasys LinkTest).

PC #2 CAN detect the PCI card, the wireless card and CAN get the MAC
address/card diagnostics reports ok - it just can't see any other wireless
cards.

I've had the same hardware(card/pci adapter) working on other machines under
WinXP/Win98. I've also got a friend with the same hardware that got it
working under Win2K. I am however unable to get this working under Win2K.

Hope that clears it up a bit - if not let me know :-)

-Brad

-----Original Message-----
From: Matt Chipman [mailto:mkchipman at optushome.com.au]
Sent: Thursday, 13 June 2002 2:39 PM
To: Bradley Dwyer; melbwireless at wireless.org.au
Subject: Re: [MLB-WIRELESS] Ricoh PCI adapter problems in Win2K - HELP


Are you talking about the other computers attached to the wired network
interface?  ie do you have the wireless card and a standard NIC in your
machine?

Or are you saying you have other machines with wireless interfaces you cant
see?

Your email is a bit confusing sorry.

-Matt.
----- Original Message -----
From: "Bradley Dwyer" <bradley.dwyer at qsipayments.com>
To: <melbwireless at wireless.org.au>
Sent: Wednesday, June 12, 2002 6:48 PM
Subject: [MLB-WIRELESS] Ricoh PCI adapter problems in Win2K - HELP


> I recently got some of the Ricoh chipset PCI adapters from the Melbourne
> Wireless TIB. I've got the cards working in 98 and XP, but I can't get it
> going under 2K....
>
> Well, the PCI card is detected and works fine, and the Enterasys card
works
> fine too... I can see the box from another machine (either using
Netstumbler
> or the Link Test in the Client Utility). I can not see any other machines
on
> the 2K box however (using NS/Link Test). There is no TCP/IP connectivity
> to/from the 2K machine.
>
> I can poll the card on the 2K machine and get its MAC address and Card
> Diagnostics reports everything is ok. Yet it can not see any other
wireless
> cards (even when others can see it). I've also swapped the wireless card
> around with 3 others, and swapped the PCI card around with another two
> (although it really shouldn't make a difference anyway - they work under
> 98/XP).
>
> I've put the card in different PCI slots, and even on different machines
> using 2K. Still the same problem.
> Has anybody else come across this? Is there a solution? Am I going mad?
>
> Thanks,
> Brad
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message