[MLB-WIRELESS] Can dimensions

[Ben Holko]

I'll be building a yagi over the next few days (break from work == good :)

I'll put the info up on a www site when its finished, complete with test
results

As a first shot I'm going to try using 75mm gal pipe, 3/8" threaded rod and
aluminimum tube + washers. This aint as cheap as a pringles can, but I'm
hoping will give better results.

B.


-----Original Message-----
From: owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au]On Behalf Of Roger Venning
Sent: Thursday, July 11, 2002 6:04 PM
To: Jamie Lovick
Cc: melbwireless at wireless.org.au
Subject: Re: [MLB-WIRELESS] Can dimensions




<snip>
> > http://www.turnpoint.net/wireless/cantennahowto.html contains
> > usefull stuff, altough I don't know how "exact" it is. Also, keep
> > your imperial/metric convertor handy.

This information is technically accurate.

> Roughly 24 cm, which is two wavelenghs, a wavelengh being about 12 cm.

1.25 *guide* wavelengths or longer is great, 0.75 *guide* wavelengths
is adequate.



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message




To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message