[MLB-WIRELESS] Question re Prisim II cards.

[Matt]

I had some issues with a couple of programmes not liking wlan0. They didn't 
recognise it. You could try aliasing it to eth1 and see if that helps. I 
haven't tried bridging..

Matt



>The bridge utils load Ok and I went through the process of creating the
>bridge, adding wlan0 and eth0 to the bridge, zeroing out the IPs on both and
>then assigning a single IP to the bridge.
>
>No errors reported but once the bridge is up I see activity at the outgoing
>wired ethernet but canot connect via it. (laptop with wired lan card and
>known good cross-over cable).
>
>
>Help......What am I doing wrong?
>
>
>
>
>To unsubscribe: send mail to majordomo at wireless.org.au
>with "unsubscribe melbwireless" in the body of the message


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message