[MLB-WIRELESS] Some help and advice needed

[wilsonj]

Hi Julian,

Thanks for the advice. Can you suggest any products I should look at?  I am
really at a bit of a loss. Have you seen webcams with a network connection?
I only know of Axis products, but they are not cheap.

Thanks again.
Regards
Jamie Wilson
----- Original Message -----
From: "Julian Featherston" <julian at concentrate.com.au>
To: "'wilsonj'" <wilsonj at dodo.net.au>
Sent: Wednesday, February 27, 2002 1:03 PM
Subject: RE: [MLB-WIRELESS] Some help and advice needed


> > -----Original Message-----
> > From: wilsonj [mailto:wilsonj at dodo.net.au]
> > Sent: Wednesday, 27 February 2002 7:53 AM
> > To: melbwireless at wireless.org.au
> > Subject: [MLB-WIRELESS] Some help and advice needed
> >
> >
> > Hi All,
> >
> > I am investigating the possibility of using wireless LAN to
> > transmit full frame rate video from my RPV (remote piloted
> > vehicle).
> >
> >  2.4-2.463 (not 2.483) at a maximum of 4
> > watts. Preferably 900 band.
> >
>
> If you had a webcam or similar with built in WLAN and two antenna ports
> with diversity (auto-select) you could use two small dipole antennae on
> the RPV which should give reasonable coverage, at the other end I'd use
> one of the WLAN cards with two antenna ports that allows you to select
> one for Tx and one for Rx. This allows you to use a huge omni to receive
> the stream and a smaller antenna (as big as you can go within 4W) for Tx
> signals, the theory is that this setup will be an advantage to setups
> where traffic is almost all one way (using the large Rx antenna).
>
>
> Jules
>
>
>
>


--
To unsubscribe, send mail to minordomo at wireless.org.au with a subject of 'unsubscribe melbwireless'  
Archive at: http://www.wireless.org.au/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
IRC at: au.austnet.org #melb-wireless