[MLB-WIRELESS] FW: Re: waveguide antenna

[Darren Fulton]

Check out Trevors website. Is there anything he doesn't do? :-)

----- Original Message -----
From: <drew at no6.com>
To: <melbwireless at wireless.org.au>
Sent: Thursday, February 07, 2002 7:35 AM
Subject: [MLB-WIRELESS] FW: Re: waveguide antenna


Update on the optimum waveguide coming, and some simulated plots of the e3
design attached... text from Trevor Marshall below:
------

Drew,
I am getting close to publishing an optimum design.

I simulated the radiation patterns of the antenna you pointed me to (below)
and this simulation shows a sub-standard design having a fair bit of time
domain reflection.

I measured the parameters from the photos he had put on the web. I assumed
a 0.25 inch slot width and a 0.75 inch center to center spacing of the
slots. I assumed he had calculated the lengths correctly.

Attached are the two patterns. You may circulate them around as long as you
reference that they came from me and disclaim that I do not have his exact
dimensions (I bet I am pretty close...)

Peak gain is computed at 14dbi, (assuming he is feeding it correctly),
terrible front to back ratio (of course). Only 3 dB more forward gain for a
much higher vertical directivity than the simple BiQuad
(http://TrevorMarshall.com/biquad.htm )

.Trevor. Marshall...
Contributing Editor, BYTE.com


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .




--
To unsubscribe, send mail to minordomo at wireless.org.au with a subject of 'unsubscribe melbwireless'  
Archive at: http://www.wireless.org.au/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
IRC at: au.austnet.org #melb-wireless