[MLB-WIRELESS] Linux Frequency's

[Mikel Pretty]

Hi,
	I have a machine here which will be active like a central hub, 1 OMNI, 2x
directional,
The directional will be a separate network to the OMNI but I would still
like them to be on different frequencies.
The OMNI will be the main OMNI for Mildura Wireless.

The Cards are the Enterasys Roam About ones brought in the bulk buy. There
are 3 cards in this machine all the same.
The cradles are PCD-RP-101CE (the ones that use the yenta_socket driver)
The OS is Redhat Linux 7.3

The Error:
# iwconfig eth1 freq 2.432G
Error for wireless request "Set Frequency" (8B04) :
	SET failed on device eth1 ; Operation not supported.

I have tried setting all the frequencies from channels 1 - 13
None of them work.


--------------------------------------------
Sunraysia Institute of Tafe
Service Officer
Mikel Pretty
Email: mpretty at sunitafe.edu.au
Phone: (03) 50223655
Mobile: 0408055017
--------------------------------------------

*******************************************************************************
This footnote confirms this email has been checked for the presence of viruses
however our liability is limited to the resupply of attachments only.

Any representations or opinions expressed are those of the individual sender,
and not necessarily those of Sunraysia Institute of TAFE.
*******************************************************************************


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message