[MLB-WIRELESS] Using a MR314 to route a dialup connection?

[Tony Langdon]

> If anyone can offer some advice on configuring things to 
> route a dialup 
> connection using a Netgear MR314, that would be grand!
> 
> I naively thought you could have this setup:
> 
> Dialup modem
> |
> Win95 Box wunning WinRoute lite
> |
> Netgear MR314
> |
> Client Mac with Airport card
> 
> I can access the router from the Mac and have configured the 
> beast, but it 
> can't get a connection from WinRoute.

Umm, my question is why you need both the router and a Windows box running
Winroute?  Seems to be a redundancy there.  Perhaps an explanation of your
network is needed.

Most of the routers can do NAT (which is what Winroute does), but obviously
you need a router with a modem port to use the modem with it...

And if the Windows box is doing NAT, why use the router?

Just trying to clarify things here.

FWIW, I usually have just the one Linux box to do all that sort of stuff.
:-)

---
Outgoing mail has been scanned for Viruses. 
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.351 / Virus Database: 197 - Release Date: 19/04/2002
 

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message