[MLB-WIRELESS] pci v2.2 required?

[Matthew Chipman]

I am currently testing an adapter from Maxtron that will cost about $75.00
inc.  First impressions are good. Testing with the $50.00 cards shows the
following.

They fit in the socket
The card leds light up and flash
I get a 1 second conectivity then nothing.
Windows device manager reports a prisim2 network adapter.

I believe it to be a driver issue which i hope to work out shortly.

I will test it on Linux as well

-Matt


----- Original Message -----
From: <simmans at datafast.net.au>
To: <mibz at optushome.com.au>
Cc: <melbwireless at www.wireless.org.au>; <joris at linux.be>
Sent: Friday, April 05, 2002 2:54 PM
Subject: Re: [MLB-WIRELESS] pci v2.2 required?


> Has anyone managed to find a good source of these adapters?
>
> > pent 2 systems have pci v2.2
> >
> > and the actual adapter requiers 5v's it doesnt matter if the pcmcia
> > card used 5v or 3.3v
> >
> >
> > the card sucks 5v and then sorts its self out
> >
> >
> > ----- Original Message -----
> > From: "Joris" <joris at linux.be>
> > To: <melbwireless at wireless.org.au>
> > Sent: Friday, April 05, 2002 6:39 AM
> > Subject: [MLB-WIRELESS] pci v2.2 required?
> >
> >
> >> Hia,
> >>
> >> most pci convertors require pci v2.2
> >> I don't recall when precicely they introduced pci v2.2 mainstream, but
> >> I don't think I have it in my routing-machine.
> >>
> >> Is this v2.2 requirement just for the 5v voltage? and if I only use
> >> 3.3v pcmcia cards in the system?
> >>
> >> Or are there other ways to get it to work?
> >>
> >>
> >> *stumbling in the dark*
> >>
> >> --
> >>   Greetings
> >>   Joris
> >>   joris at linux.be  UIN: 25569167
> >>   PGP is currently out-of-use
> >>
> >> To unsubscribe: send mail to majordomo at wireless.org.au
> >> with "unsubscribe melbwireless" in the body of the message
> >>
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
>
>
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message