[MLB-WIRELESS] Proposed cabling/connectors: Opinions wanted!

[Tony Langdon]

> N connectors are the standard, so i'd get as short as 
> possible pigtail from
> mmcx to N female or male, a N connector on each end of 
> LMR-400, and plug
> straight into an antenna which will most likely have a N female jack.

I agree.  N connectors would be the most common connector used at these
frequencies (SMA is common in other areas, but these are a pain to wire
up!).  If I ever get in a position to put up a wireless link, I will be
using N connectors where I can (probably everywhere except for at the card
itself).  For me, that also gives me flexibility to swap bits between
wireless and amateur use (since the latter uses N connectors at the higher
frequencies).

--
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a subject of 'unsubscribe melbwireless'  
Archive of the Entire mailinst list at:
http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless