[MLB-WIRELESS] Orinoco card as an Access Point

[Drew]

actually I don't think cisco is a standard prism2, and no, you can't use a
orinoco card as an AP. from what i've read, when they're used in say, an
airport, the firmware is uploaded to the card by the AP, but I'm not sure if
you remove the card after if it retains the AP mode, but I would guess no,
or someone would be using their airport to upgrade everyone's cards already.

so basically if you cant a AP in a card, you need a prism2.

----- Original Message -----
From: "Luke" <lrich at ruralnet.net.au>
To: <melbwireless at melbwireless.dyndns.org>
Sent: Thursday, October 04, 2001 7:09 PM
Subject: [MLB-WIRELESS] Orinoco card as an Access Point


> You guys are probably sick of me asking this but.......If something like a
> Airport or RG-1000 use orinoco silver etc, can you run a orinoco pcmcia
card
> indiviually as an AP?  People keep saying "use a Prism II" but a cisco is
a
> prism II but everyone in the know says no-can-do AP on a cisco.
> AAARRRGGGHHH!  If I cant run a pcm card as an AP then a RG-1000 from the
US
> for $200 US might have to be the go, but if I can use a pcm card the Ill
> just get a card for $70 US.  (www.pricegrabber.com)  Cheers.
>
>
> --
> To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
subject of 'unsubscribe melbwireless'
> Archive of the Entire mailinst list at:
> http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
>


--
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a subject of 'unsubscribe melbwireless'  
Archive of the Entire mailinst list at:
http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless