[MLB-WIRELESS] Prism2 driver problems...

[Steven Haigh]

After getting the prism2 package at: http://www.epitest.fi/Prism2 and after
installing it all, I get the following error:

[root at router sysconfig]# /etc/init.d/pcmcia start
Starting PCMCIA services: modules/lib/modules/2.4.13-ac5/pcmcia/i82365.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.4.13-ac5/pcmcia/ds.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
 cardmgr.

any ideas what's wrong? how can I pass the arguements that it aparantly
requires?

Signed,
Steven Haigh

Out the 100Base-T, off the firewall, through the router, down the T1,
over the leased line, off the bridge, nothing but Net.

The net will not be what we demand, but what we make it. Build it well.


--
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a subject of 'unsubscribe melbwireless'  
Archive of the Entire mailing list at:
http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless