[kernel-xen] kernel-xen-3.11.1-1 currently building for release.

[Joe Fialkowski]

Thanks for the clarification. I was going to jump to 3.10 today, might as well make it 3.11 and save some time later. 

Thx,

-- 
Joe Fialkowski
ZoomCloud.net
Hosting • VPS • Dedicated

On September 14, 2013 at 11:08:49 AM, Steven Haigh (netwiz at crc.id.au) wrote:

Hi Joe,  

It is not a requirement to use this kernel in both Dom0 and DomU. The  
old DomU kernels will happily chug away as always.  

The new features introduced in 3.11 will only be available if this  
kernel-xen package is installed on both the DomU and Dom0.  

On 15/09/13 01:05, Joe Fialkowski wrote:  
> Steve, earlier when this was in testing, you mentioned the Dom0 and Domu  
> both needed to be running this kernel. Is that still the case? I know I  
> have clients running older kernels in thier DomU.  
>  
> Thanks,  
>  
> --  
> Joe Fialkowski  
> ZoomCloud.net  
> Hosting • VPS • Dedicated  
>  
> On September 14, 2013 at 10:59:16 AM, Steven Haigh (netwiz at crc.id.au) wrote:  
>  
>> Hi all,  
>>  
>> Kernel 3.11.1 has been pushed as stable now. I've updated the initial  
>> testing package to 3.11.1 and am building it for release after no  
>> initial testing issues.  
>>  
>> There is one small change in behaviour. The kernel-xen package can now  
>> be used in both the Dom0, DomU or baremetal installs. This is a benefit  
>> as in some cases there can be a large performance increase when using  
>> 3.11 on both Dom0 and DomU due to improvements in Xen drivers.  
>>  
>> This means that for new installs, to guarantee a correct install, xen  
>> and kernel-xen should be installed in separate stages.  
>>  
>> I have updated the install guide to reflect this:  
>> http://xen.crc.id.au/support/guides/install/  
>>  
>> Current Changelogs for 3.11.x:  
>> * Sun Sep 15 2013 Steven Haigh <netwiz at crc.id.au> - 3.11.1-1  
>> - Update to inital stable release 3.11.1  
>> - Full Changelog:  
>> https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.11.1  
>>  
>> * Fri Sep 06 2013 Steven Haigh <netwiz at crc.id.au> - 3.11.0-2  
>> - Add check for /boot/xen.gz symlink to avoid adding hypervisor lines to  
>> a DomU  
>> or baremetal install.  
>>  
>> * Thu Sep 05 2013 Steven Haigh <netwiz at crc.id.au> - 3.11.0-1  
>> - Initial update to kernel 3.11.  

--  
Steven Haigh  

Email: netwiz at crc.id.au  
Web: https://www.crc.id.au  
Phone: (03) 9001 6090 - 0412 935 897  
Fax: (03) 8338 0299  

_______________________________________________  
kernel-xen mailing list  
kernel-xen at lists.wireless.org.au  
https://lists.wireless.org.au/mailman/listinfo/kernel-xen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.wireless.org.au/pipermail/kernel-xen/attachments/20130914/a8711471/attachment-0001.html>